shizzzon

i do when runnin over 30kw

what amp(s) was he using for the Deltas? i've been lookin for some amps for such install and the only two i've found are the following- US amps XT 1600.2 2v3 - ~400w@8ohm dynamic Alphasonik PCA1000HCE - ~900w@8ohm rms

yes but according to those who cracked it, they must have came a long way since the late 90s when i first experimented with them... i guess because pcs are so fast now compared to then.. then of course even if i made a 300 character password with PGP encryption... If you have a license to use the software that allows the use of a video card to mathematically decrypt any encryption 100s of times faster.... encryption is pointless then.

well lesson learned on ssa... i got to watch who's lurkin on these forums

i'm completely lost on curve. I was playin with curved material throwing an image on it and it was all distorted.. I wanted to build a dome in the room but due to my lack of knowledge.. i don't know how to pull it off so just a flat screen. that screen link u posted was the first site i ever go to bout projectors, hehe, already read that article.

well basically a diy screen like i mentioned would just be super white photo type paper photographers use in the background with a non-reflective black border(not painted) vs this goo paint that this company claims has spent yrs perfecting it's properities They want almost $200 for the paint.

lookin for some competitors who have some experience with 4th orders so i can get a glimpse on starting on my own testing efficiently

it could be just straight clipping led to failure. Clipping is when trying to push a signal past it's normal capability. This will generate lots of heat once u enter into clipping. clipping is typically caused from turning the gain on the amp too high, having the volume on head unit higher than what the amp was setup at, dropping voltage way down low... For a professional installation, they should have at least told you where they set your amp up at volume-wise on the headunit. If they only set it up with volume halfway... that could be a big problem and even then... if they did it right! Don't blame yourself yet because you are knew to this but some things you should acquire if u choose to stay in car audio is some troubleshooting and installation tools- DMM - digital multimeter O-scope - oscilloscope. Velleman makes some good portable ones like the HPS10. This is used to fine tune an amp to prevent such scenarios from happening. Just with a dmm, u can troubleshoot almost anything car audio related. The o-scope is primarily to safely setup your amps to their maximum potential. It's expensive compared to a DMM but ever since i bought mine, i never damaged a speaker since.

well let's find out why it died. Was it stinking when it went out? if it was, you had the gain on the amp set too high for the volume level of the stereo that it was on when it happened. No smell? Push slowly down on the cone dispersing even pressure by using 2 hands around the dustcap. Do you feel or hear any rubbing sound? You could have had the sub moving too much. Your subsonic filter may not have been up high enough for the box it was in.

u got any jumper cables? Quick test is to take one clamp and hook it to your amp's ground location. Take the other end of that cable and hook it up to your battery's negative terminal See if that fixes it.. if it doesn't, it's not your ground which would point toward signal cable location.

did u wire the sub in series just for the rockford amp or was it wired that way on the other amp too?

it's gotta be a custom screen. I like to build stuff myself. I can't really find reviews of goo paint vs using Super-white photo background sheeting.

anybody care to enlighten the 2 choices for a custom area to project on inside the house? My screen size will be approximately 122" diagonal. 4ft vertical and 9ft 4in horizontal. I just got the projector and havent even messed with settings yet. the projected size just listed is with no video source turned on so aspect ratio may actually change with widescreen video played... haven't tried yet.

then keep it and distribute it... email me @ [email protected] and i'll give u the password

doc has been re-encrypted... If you claim to decrypt this one... i will use alternative encryption methods which will involve more than one code.

if your pc skills prove to be successful... the next updated version of this doc will be over 100 characters long...

good luck...

my phone apparently sucks on recording video in the dark with or without flash on.

measure dc voltage on amp's power and ground terminal while someone else starts cranking the stereo up until it starts doin it again. See if your voltage is dropping extremely low when that happens.

haha u sound like me. nah it's fixed now

just fixed the link

Welcome to another one of my terrible videos... Just bought a new Mitsubishi HC3800 1080p Projector so all my buddies can get together on the weekend and play games on it outside. Here is a terrible video of it-

i see many people have already received their meters today, that's great! If anyone ever has any questions, PM me for help

if it only does it when jammin loud then it's the alt pullin lots of horsepower out of the engine. With an alt like that, at full tilt output above 1800rpm or so, u can easily lose about 30hp.

i havent tested the usb, just the lcd ones but i believe you plug it up prior to opening software. Then u go to preferences or options and select proper input selection but i cant remember off hand. I'll be doing extensive reviews of the usb and lcd so i'll know for myself.