Quentin Jarrell

This will be a low line. Running a 10, 12, and 15. I will have prototypes in a couple weeks. We are also designing a 15 and 21 right now with a goal of high 60mm's to low 70mm's xmax at 15% THD. They will be groundpounders with a FS around 18hz. Very musical with retarted amounts of output.

If so the amp is located on the driver side of the car. This is a 5 series but the 3 is almost identical. If you haven't done many systems before I would recomend having an experienced installer do the install. All you will need is some line level adaptors to to attach your rca's to your factory speaker wiring unless your amps high level inputs. Remote can be found in the rear passenger side using a green ignition wire. However if you want the amps to stay on untill you push the key you need to catch the keysense wire up front and use a relay because accesory for the factory headunit is databus. If you run any wiring up front the seatis fairly easy to remove just be carfull of the seatbelt locking mechanism wires. The are attached to the same bolts that hold the back of the seat down. If you don't have the fold down option then you will have to use a small screw driver to open the latches holding the top of the back of the seat.

If you have a 2006 you more than likely have the "I drive" I would assume?

the airspace was what we talked about. I think like 3.48 but I will have to look it up. It is finished and packed ready for usp tomorrow.

These are some of the specs. This is a 10 inch driver Former Dia: mm 2.953 Wire dia: mm 0.024 in Former Thickness: 0.1 mm Layers: 4 Wind Length: 28.786 mm 1.133 in Offset: -30.231 mm Surface Area 7959 mm

This one might be a little better to see.

It also has a XBL^2 motor

Is that a good or a bad thing?

Take a look at these specs and tell me what you think. It's a 10 inch woofer, xmax is alomst 25 mm, and weighs about 36 pounds

you along with six others will be contacted this week for final designs and fund info.

thanks, we have already talked about them over the phone so I will extend it to them.

Just keep me updated. If you have any problems give me a call.

holy wow! Thats commitment right there. Even though a $2 thing of silicone could fix it he offers a new box, lol. Great customer service right there. No, I don't rig anything. I treat all my client's product like it is my own. I wouldn't want to but something just to have to fix it. Regaurdless if it was free or not, if it's broke I will make it right.

Let me know if you find any problems with the enclosure. If so I will send out a new one ASAP.

Yea, last week UPS shipped a $6000 order from a manufacurer I deal with to the wrong address. I guess the delivery guy didn't read the label that read "AUDIBEL CUSTOMS ATTN: QUENTIN JARRELL" when the guy signed for it. But I had it two days after though. However, I do insure all my packages and use recipient signature request.

yes sir you would be one of those luck eight.

Just trying to keep people in the loop. I have been getting a lot of e-mails from people nervous they are going to miss out on this deal. If for some reason I haven't responded to any of your e-mails please call me on the phone. It is listed on my sig. As long as I hear from you by Friday in one form or another you will still be eligiable for the free enclosure deal. As of today I have eight clients with enclosures built and waiting to be wrapped and shipped out. All these will be shipped out by Tuesday at the latest, I think Monday is a holiday. As soon as these enclosures are packed and picked up by UPS I will begin working on the other sketch-ups for others interested. thanks, Quentin

You should have your's tomorrow right?

awsome, looks like a snug fit. Let's see some vids

just send me an e-mail. I'll extend it to you a few days.

but, don't worry if you haven't paid for your woofer yet. As long I have spoken to you through e-mail or over the phone you will be locking in on the price. Also once the deal ends anyone who purchases any subwoofer from me will recieve an enclosure at half off my normal listed pricing. This will be the standard and will never expire.

Roughly it's .5 foot tuned to 75 hertz. I really just built it using some scraps to play with the design. But I'll see hot it sounds.

Just a little box I toyed around with. And a size comparison with a Death Row twenty one.

He badly needs to send me that car so I can make his trunk install to par with the rest of the vehicle. It's a damn nice enclosure but he should have the whole trunk done up.

If you want something retarded loud that will run you out your car do these. I would never have them in my car but they won't have a problem keeping up with your bass. http://soundstream.com/AudioProducts/Components/pro.htm