Quentin Jarrell

I get to ride down to Morgan City tmw.

Don't see how y'all make it around BR with that much drop

If you're wiring them together, place the sub with dual leads first point of contact. Just what I would do. In theory both subs see the same power at the same time, but, just in case lol. Audio signal is A/C. There is no first point of contact. Positive and negitive is only relative.

Nope not at all

4 months

The old edge doesn't allow enough travel so a new one is needed. The current 12, 15, and 18 edge is plenty enough for 12 spoked baskets. Klippel results show 40 mm one way. Which is well past BL limits.

It can take a bit for him to get back to you. I recommend him over anyone else. I use him for my personally vehicles. I actually just bought a 160 amp for my daily driver. I'm running two IA 20.1's with two diehard marines and the factory battery up front and have zero voltage drop. And this is with the factory pulley as I'm waiting on a new belt so I can run his supplied overdrive pulley.

Haven't missed out on anything. Dual leads will be standard on the Ethos The cone with the new edge shown is for 10 inch drivers.

That is easy. I dont' really use any measuring devices.It's already implied that you have done, can do, or have better than anything someone else posts on this forum. Pretty sure it's listed listed in the rules when joining SSA. LMMFAO

skip to 830. This is when you know you've been cooking too damn long.

this guy's was a bad m'efer too.

you can thank this man for that.

Because the cook stops making food at 5 PM. It sits on the table until 5 am so the night shift can eat during the night.

My lunch a few weeks ago

As of last week it's not complete.

No crow's foot wrenches? Use a stills on wrench on the extension.

Legal?

At this point there are roughly 95 drivers out there. I've had 3 people with burnt leads and they were all running right at or over 2,500 rms. The new dual lead set up should handle more power than the coil.

I have cheap ass 2.50$ raptor cables in vehicles for over 12 years with no problems

As you have been told. Call Don

Layaway is best. Lead time is only around 7 business days.

Looks good. Just bend the terminals over a bit so the cone doesn't slap them.

The encore will not be available till spring but they use nearly identical boxes.

4 runs of 1/0 through the firewall...not my idea of a good time.

Interest free layaway is available too