burnboy

ive got a 15 im selling cheap

it was the new termlab. the position was below the dash? io dont know how to exdplain it but its where its supposed to be. I had the blue rsx, i was only there from like 11-1130 cause i had to leave town,i didnt enter, think iwould have won anything?

i hit 143.8 in a sealed box in my rsx with 2 15's and a jbl 1200.1

im in elizabethown, 42701

my email is [email protected], im in Ky email me cause another memeber made me a slightly higher offer.

Its for spl only. I have about 6.5 cubes to work with, its for 2 15'' d2s. I want it ported and tuned to 45 hz. i want massive port area and have 14 inches of depth to work with. Any help will be appreciated, i want to put up some big numbers for SI!

300+shipping

jbl 1200.1 all the way! bench tested to do about 1400 watts, a little under $300 on ebay

post your complete set up (subs, amps, box details) and the car its in. I want to see what everyone is hitting. Also if you know what kind of set up the guy is using who hit 150+ withtheone 12 let me know

id be interested in selling one of mine for the right price. ive had it for about a month and been running 600watts to it with a jbl in a sealed box.

its an rsx, ive heard that the resonant frequency is anywhere from 45-55. i want spl. i'm looking to compete. should i tune to my cars resonant frequency or should i tune to what SI says to tune to?

I built a sealed box for my car already but i need to build a ported box for comps. Ive got 2 15'' d2s with 1200 watts rms My cars resonant frequency is about 35 from what ive read. Should i tune it to 35? or to what the subs are reccommended to? or ive heard to tune about 10-12 hz above my cars resonant freq.?

so there are only 20 15's out there?

well i pushed them a bit harder today. I looked at the amp and all the settings were turned all the way down. so i turned them up and pushed the subs a bit more. They are almost as loud as the 4 12'' mtxs i had in my old blazer. the mtxs had 2000 watts though. They aren't as punchy as i was expecting but thats because i have them spliced into onyl one speaker because i have a factory head unit. My box has a few leaks that i will patch with some fiber glass resin as soon as i can. there is a small leak where i drilled the hole for the sub a bit too big. Ill fix this by getting some speaker rings (anyone know where i can get some online besides select products?) So far I can give them everything the jbl 1200.1 has, about 1400 watts, and they do not clip at all. I will keep you all updated as i progress on the project. My first competition is april the 18th, I will hopefully get metered before then and let you all know.

.