spare69

I think the Edges of the carpet are just shot at a wierd angle there are no fuzzies hanging off the box or anything XD And it sounds kick-ass. See i listen mostly to rock and it has an awesome punch and very clear. Rap and Dubstep are great too. The box is designed for 2.5 Cubes ad thats what the sub needs. I have it wired at 0.5 Ohm. XD

Hmmm Im thinking ill throw in a surprise twist and add another Fi BL 12" to the equation. Gimme 2 weeks.... XD

...clean is defiantly not in his mind.

whats your thoughts? Im open to any suggestions! The original tweeters were smaller, so i dremilled them out a bit and have them in now, but in the process nicked it up a bit. I was thinking to wrap it in tan vinyl but idk.....

RCA'S ran behind the glove box area, I looked for DAYS for a spot to run wires behind here without taking off the dash completely... Turn around View of It Tweets in Dash, Not done its got some bad look to it from the cutout but will fix with some small wood pieces and tan vinyl. My typical Voltage at idle with no sound...4 amps hooked up with stock alternator....Also Red button to turn off my underglow lights separate the interior lights. My wire Mess with an infinity 4 channel amp powering the 2 front door speakers....Also battery........Will be cleaning these wires up a bit more.... My alternator with Big 3 My main Ground Wire under the Rear side Drivers seat Wires from Firewall My quick way of wiring the underglow..... Will be putting some rubber gromets and what not....ATM only have 1 side of lights because I failed to solder the other strips....(soldering guns are damm hot and burn your fingernail to your skin btw) found that out...... Temporary For underglow until I get grommets...

ALL those coming soon going to post those today i suppose. XD. Im actually stull working on the tweets but ill show you them regaurdless, had to do some custom fitting. Also im getting some noise from the tweets, Ive checked the grounds, ive checked the rca's they are running seperate the power wire....I have no idea any suggestions?

Well the parts that are not carpeted cannot be seen with the final bits, But yea This is my first time doing anything with wood like this along with carpeting...so I'm satisfied with it

Some of the Equipment. Real build Log With steps Coming SOON!