Everything posted by tbear55
-
need help!!!
I had blown one of my subs a few months ago so I unhooked everything and removed from vehicle. After doing some upgrades and getting new subs in, I finally reinstalled them yesterday. The problem I've ran into is that the amps aren't producing any sound. They power up and show that there on, but no sound. What voltage should the remote wire show? This is the only thing I can think of to check. I will say though that when I had a sub blow it blew the fuse between batteries and the amps where underpowered for awhile. Could this have caused internal problems? All help needed fast!!!
-
which amp would be better for my setup???
I'm in a quandary. I need to make a quick decision on amp. Equipment I have is 220 amp alt, big three done, two hc 2400. Subs are two fi ssd dual 2, box tuned to 45 Hz. I plan on competing in s3 and trying to decide which amp to get before pre-order ends. Would you go with the saz-2500 or the saz-3500. All info and suggestions appreciative.
-
differene in fuses....
Are the MIDI fuses better than the bigger anl fuses?
-
bc2000d fuse capability.......
What I meant was MIDI fuse and the bigger anl. I don't believe in cheating the rules. If I can't do it legal I don't want to do it at all. I learned10 years ago of the tricks people played when I started in as1. Couldn't stand it then cart stand it now. I didn't even know about cryo fuses! I've been out of the picture for a few years so I'm behind times in terms of competing. What amp would you recommend for two 12"fi ssd d2 to be competitive in s3. I'm timed at 45 hz and have good electrical.
-
bc2000d fuse capability.......
R the mode's better than a regular anl. After much debate and learning quite a bit. I guess I'm just going to buy a bunch of different fuses and see what I come up with. Pretty sure I can go with the bigger amp and use a smaller fuse for just a few second burp. Then run a different fuse in drive bye.
-
bc2000d fuse capability.......
That's what I afraid of. Thanks
-
bc2000d fuse capability.......
Awesome can't wait to see it. I'm struggling between s3 or s4. Depends on which amp I Gp with.
-
bc2000d fuse capability.......
That's when I plan on starting. Definitely looking forward to seeing you there. What class you in?
-
bc2000d fuse capability.......
Morehead. I appreciate that run down. That explains a lot to me. I will be trying that. BTW what city you from.
-
fuses.... what to use on high wattage.
I understand that it doesn't have time to heat up, but the experiences I've had when u have enough electrical to back high wattage they pop instantly.
-
bc2000d fuse capability.......
Thanks
-
fuses.... what to use on high wattage.
It was brought up in another topic I have, but they said they could get an 80 amp fuse to hold on a 3500 watt burp. I plan on competing in meca and knowing how this is done would be vital info to me. Let me know how its done.
-
bc2000d fuse capability.......
Yea its for meca. I've had luck b4 burning 4k off 200 amp. Need more info ok how you can burp 3500 off of 80 amp. I want to be competitive and if you can tell me how to use my amp draw correctly I'll look at getting the bc3500 instead. Obviously I'll run it on a higher rated fuse for daily, but you've peaked my interest on this. Teach me how!! Always interested in learning new things. This will be the first year I've had to worry about fuse ratings so please help me!!!
-
bc2000d fuse capability.......
I am wondering if the bc2000 will allow the use of 175 amp fuse. I will be burning it at a half ohm. So all u guys that have had experience with this amp I would appreciate ur thoughts.
-
comp amp for two d2 fi ssd subs....what u think?
That was my other option. I don't know if it will hold off on a 175 amp fuse. Has anyone done testing at .5 ohm to see what kinds of wattage it puts out?
-
comp amp for two d2 fi ssd subs....what u think?
BTW way those are the rules in which I'm held to.
-
comp amp for two d2 fi ssd subs....what u think?
Their 12" subs sorry for leaving that put. I've got my eye on the saz-1500d. I just don't know if it will get me in the 150's. I had two mtx 9500's running off 2000 watts and hit a 148.3. But I won't even mention what amp I was running, to embarrassed. Lol. Are their any other amps u guys would recommend?
-
comp amp for two d2 fi ssd subs....what u think?
electrical system consists of 220 amp alt., 2 hc 2400 kinetik, and the big three completed. I have a 2000 blazer, box is built to vehicles peak tuning frequency. What would be the best amp to use for competition in the street 3 class for meca. Price of amp is not to much of an issue, just looking for something to get the most from the subs. All help would be appreciative.
-
problem with order from fi.....
Has anyone had problems getting their orders from fi? I ordered two ssd's on the 10th and they initiated shipping process on the 15th, but has never sent it out. Just wondering if that's typical or not. Anybody with fi experience please let me know.
-
r these amps over rated?????
That's what I tried to tell him. I told him for what he spent he could have gone with much better options. I.e. sundown, crescendo, etc but those big numbers struck his fancy. Oh well I'll help him hook them up and get back to you guys. Lol
-
r these amps over rated?????
A buddy of mine just got two power acoustik demon 6000d series amps. I looked them up and they said they would do 3500 @ 1 ohm and 7000 @ 2 ohm when strapped. I've never seen per heard these amps so he enter to know if anyone has any knowledge of about them. I thinly its very sketchy ratings for the price. Anyone have an idea?
-
which amp would u choose?????
Thanks guys, that's the way I was leaning towards. Just wanted second opinions.
-
Modified Crescendo BC3500d's
Great way to show them off. It looks killer!!!!
-
which amp would u choose?????
I ment half ohm. Money isn't the question just wondering which would perform better.
-
fi ssd........break in tome?
I've seen them in plenty of daily drivers and in spl lanes. Alot of power is only around 4000. That's not daily mind you just for a quick burp.