lancer3

flakko tryed switching rca's also. MarkyMark the problem i am gettin is not related to the bass, cus i have it off and still noise. its not lould but i just want to get it off.

ok guys i got some time this wknd and tried to solve my noise problem but i came off with no luck. this is what i tried. Take off rca's and test amp alone- no noise plug back rca's on amp then removed rca's from hu- no noise add new ground to hu with rca's connected like normal - noise add ground to rca's - noise used external signal to amp- no noise used a next hu (clarion) - noise is there anything else i could try...

Thanks for the reply guys. Will use the HU xover, kinda figure **** out yesterday while doin a lil tuning. Well M5 its a cs3 lancer (2004 model). And what do u mean by a fresh ground for the HU, just used the normal ground from the deck. Will also fiddle around with the options u gave me to see if it solves the problem. Flakko, i am leaving the grounding of the rca to HU as my last option. If doing this do i need to ground all three rca output or just one. By the way on a manual for the AX amps which i found on the net, states, The input of a us amp must be grounded for proper operation. Does this means that i must ground my rca to hu, rite.

Hey guys just got myself a ax-5600 us amp, and when connected i am getting slight alt noise, what can i do to get rid of the noise. My setup is as follows 880prs hu, HD-62 cdt components (front)and Cl-60 coxial (rear) with a 12" alpine type r in sealed box. Used 4g for power and ground and phoenix gold zero point rca's. Also can someone explain the crossover in the amp, when i cross @ 50hz on deck for sub and 50hz in amp i get no bass. i have to set d xover in the amp midway to get fairly enough bass. How does the 50hz to 500hz on the amp work. thanks.

so how the ax 5600 working 4 u so far