bulldogfreddy

Shared chamber on driverside ~?hz. Was just wondering about the sub on the port wall and getting cancelation vs center port.

Anybody. Recommendations on split or shared chamber.

Looking ~15^3 after displacement with 18.5 x 9 slot port on driverside tuned ~34hz since it will be at B pillar. Had talks about tuning it higher since it will b pillar (midgate) and will go lower anyway in Hz's. Also to do center ports with separate chambers instead. Will be running a Memphis Mojo 4kw and have upgraded my electrical. Looking more at a daily setup and a shared chamber with slot or separate chambers.

Looking ~15^3 after displacement with 18.5 x 9 slot port on driverside tuned ~34hz since it will be at B pillar. Had talks about tuning it higher since it will b pillar and will go lower anyway In Hz's. Also to do center ports with separate chambers.

Are these T/S specs. listed individual,series or parallel.

Old Amp Rack under the rear seats

Here is some pics of my center console.

Roger. Will do

Thanks everyone, dual 1 zcon 18's on order. Now it is time for me to work on the box plans.

Sound like a good idea but will be only able to run one (evil)with the price and power handling needed. I want to have clean power going to the subs.

Will I be running a Memphis Mojo 4kw but I still have two Brutus bxi2006 think that the one amp should be plenty.

Looking for low hard bass to balance out.

Well I am look at migrate install into the bed, so I have room in the bed. The amps and the batteries already install in the cab. I am also running In dash epic, Clarion els 740 and mdc360 crossover, she's zxi150.4 for delta lite 10's, autotek sm4-1000 for (4) 6.5, (2) selenium St200 and (6) dome tweeters.

Just low and loud (daily pounder) not really for competition.

Thanks lithium, I know that the 6th order is good only in the range that it's tuned between. The ported box will give me a wider range.

Looking 2 18's zcon or xcon for an Chevy Avalanche. Will be powering by a mojo 4 with upgrade alt, two kinetic 1400 for now. Looking more for sq right now, in at least 13-14 cubes after displacement (slot port). The zcon's do have a lower a qts, xmax, and bl compared to xcon. But spl is slightly higher on the zcon. Later might try an quasi 6th order. Thanks in advance.