argenis69

Yes, aeroport will work for you.

I'm looking to buy a good quality, good priced High Output Alternator for a 2002 Nissan Maxima SE. I have 2 Kinetik KHC2400 Batteries and around 4,500 RMS in amps. Thank You.

???

I have a 2002 Nissan Maxima SE, I have 5,000 Rms in amps, and I Need help, Where can I get or order a Good Quality High Output Alternator, and have no more problems? Thank you.

In my personal opinion, I like the wires the thicker the better.

Pm sent

Yes, remember that there's a lot of current draw from the amps and if wires or connectors are loose or to small they will heat up very bad and melt.

By looking at the picture, I believe those wires where some what loose, and that creates way more heat on the wires.

Bump

I recommend disconnecting your batteries, meanwhile, to avoid any shorts or fire.

I have a question about my car or alternator. I have a permanent volt meter inside my car monitoring my electric status due to my audio install, I've noticed that when I'm on the highway at high speed or when at high idle, normally above 2,000 rpm, the voltage drops, below 12.6v and the battery and brake lights start to blink on and off on the dashboard, even with my radio and complete system off. What is happening? Thanks.

Wow, be careful, pictures will help.

Sure, I'll check on the results.Thanks.

Thanks guys.

Hi SSA, 1- I want to know what's a line driver specifically for? 2- Also is it worth having? 3- I've heard that the higher the voltage the better, but I don't really know what is meant by that. Please explain. 4- I have an Audiocontrol Eql concert series, does this have a line driver? My hu is a Jvc KD-R730BT. Thank you.

Hi, I have a 2002 Nissan Maxima, I see lots of people taking about the Sound Deadening the front doors, which mine have 6.5 speakers, and telling me that will help my install, etc... I would like to see some experienced opinions on this and if possible what type, what amount and which brand do you recommend?(the less expensive the better) Thank you.

I bought the Image Dynamics 6.5 CX62 V2, Thanks Guys. Any opinions on the install and tuning of it?

Thanks. pm sent.

No problem.

Bump

If you did all the connections checks, than there's a slight problem with a part that goes at the output of the alternator, some voltage something(sorry don't know it's name), that is just not fast enough controlling the output voltage, in that case I think your only option is a second battery closer to the amps.

Exactly, that's another true thing, but I'll go first and check all the connections first to make sure there clean and tight.

It's it only the front lights flickering?

If there hid's, check all there connections one by one, because they are very sensitive, if not check all the connections on your system, including all grounds, batteries, etc... if still flickering then add relays to front lights...

lol, yeah I learned. I have an flare ported 15" Fi SP4 3000rms. I want to get loud in front and yes I like the more SQ possible.