slim2fattycake

And wtf does this have to do with Fi?

Man, for a second, I thought this was another how to find area of a circle lol. Check this out. GlassWolf's Homepage

Only one AQ 2200? Hehe.

are we talking about a nissan 300zx? How are you going to get that much space?

If you have to ask if the btl can handle 3k+ then you shouldn't run that much. Stick with the AQ 2200D

I am really digging those rim colors. Nice build too lol.

Get real idle output. Go with DC Power. I get 150 amps at idle out of my 4 cylinder.

What type of meter was it, where was it metered at, and what equipment were you running.

Dude, you know how many times this has been said or talked about? It gets tiring to tell people about ohm loads and how much a certain sub can take. Forums are for when you cannot find your answer by yourself or don't even know what to search for. But you do know the forum has a search feature too right?

HAHA.

x2 except I use drywall screws as they are cheaper. Have you actually ever tried to tear a box down? The screws just pull out. The seams never breaks with TITEBOND glue. The wood breaks where the glue stopped seeping in before the seams and corners. My home theater box was 11 cubes and it was screwless. Took longer because I had to use batteries and clamps to hold it tight together for the glue to dry. Screwing makes putting panels together faster.

Man, I didn't know so many people on the board were design engineers for amps.

Well would it say that the BL is weak compared to the SSDs if my two 10" SSDs on 2k did 144s over your 140 on 3k? No, its all install. That is 80% of the outcome. I gained 2dB by just moving my box around and pointing the sub and port in a different direction. Sorry to say but your question is useless and will lead to nothing.

HAHA. Do some research and go ahead and just email Fi for a recone. Why do people think the gain knob is a volume knob? If it was a volume knob, then it would be named a volume knob.

Yup, OP has no idea what a gain knob is. Its not a volume knob.

Seriously, I have read about people blowing their SSDs with 500 watts when I have put 1500 watts on the SSD daily without problems. Its all install and up to the user. If you have to ask how much power a sub can take, you shouldn't go over the rms rating.

That is completely different than what I got from your earlier post. Read up what a gain knob is for.

1 watt if you're a retard.

SSA Forum - * Bigrank916 - USB/LCD Meter * woodskilla - USB/LCD Meter * oscar r - USB Pro Meter * SexySoundLab - USB Meter * power-fanatic07 - USB/LCD Meter * john denver - USB/LCD Meter * B-chi - USB/LCD Meter with lowered bandwidth to 10hz. * nsuvltr - USB/LCD Meter * 1loudsvt - USB/LCD Meter * harveywong - USB/LCD Meter Other Forums - * 01SpyderDb23 - USB Meter * 90TalonTSi - USB Meter * original iceman(UK) - USB/LCD Meter ROE Forums - * lifesfordeath - USB/LCD Meter * bwoodroof - USB Meter CA Forums - * audio_phill - RTA with enlarged bandwidth to 10hz-22khz CACO Forums- * Team Aftermath - Robert - USB/LCD Meter Other Locations- * D.A.G. - USB/LCD Meter Total - 18 Can we get to 25 for the ultimate discount? Please know that the group buy is about to end soon so be sure to have the money ready.

200 for yellowtop? and 1300 for 2500 watts? No, thank you.

Don't forget about SDS.

Don't waste your money on the cap. you won't notice any difference. Also, make sure you order the right coil configuration for your sub to wire to your amp at the power you are planning.

He needs to redo that floor he got for the nos bottle.

Really, it could be possible but probably not easy. Someone would have made a company to run their cars like this already. If it works, whoever is selling these HOW-TOs have to be saving lots of money or have to be making a lot of money so they should be able to afford something better than a site like that. I remember reading about how HONDA was testing on a remote island a vehicle using compressed air and exhausting water vapors. Don't know where that went though.

spam?