slim2fattycake

how much power doe your friend have to run?

clamps are a must. Someone said a while back that you can never have enough clamps. You technically don't need a router as if you are patient then you can make near perfect circles with a jigsaw. Get a good fence on your tablesaw. it's what makes perfect cuts.

I wanna go but no funds for fun as of right now.

Man, he took off after setting up his amp. I couldn't get a picture at all. I'll have to do it tomorrow.

Dude, I saw tell Jacob. Dude sounds like he will make people go the opposite way that sundown customer service should be.

everything is installed. just needs a fuse holder in the trunk near the amp. Also, for some reason either his wiring or whatever, the amp didn't turn on. His deck had three blue wires so I have no idea. I gotta get a DMM tomorrow and check the wires. A bad note - I was about 10 degrees off so we had to push the box up a little into the cabin and then carpet the whole rear seat for it to look more smooth. Damn angle finders. I was going to do two tone, gray and black but we went with just black. He really liked how it turned out anyways. I'll get more pictures tomorrow and I'll get a video maybe. This will be a first of me hearing assassins as well as the owner.

PM me if you want to know where to get dekas for 100 + shipping with (1 year warranty too I think). Also, I can give you DC Power's owner's cell and he will have something for you. I blast my 3k at idle (700-800 rpms) a lot with a deka 9a31 in the trunk and a 9a34 under the hood.

weaksauce. Shoulda done the 20 10s idea. lol.

Depends on how much I like it and how much you wanna take it for. lol.

u have une for sale? Maybe lol. I am actually in a trade for one.

SSA Forum - * Bigrank916 - USB/LCD Meter * woodskilla - USB/LCD Meter * oscar r - USB Pro Meter * SexySoundLab - USB Meter * power-fanatic07 - USB/LCD Meter * john denver - USB/LCD Meter * B-chi - USB/LCD Meter with lowered bandwidth to 10hz. * nsuvltr - USB/LCD Meter * thehawk93 - USB/LCD Meter * 1loudsvt - USB/LCD Meter Other Forums - * 01SpyderDb23 - USB Meter * 90TalonTSi - USB Meter * original iceman(UK) - USB/LCD Meter ROE Forums - * djmatrix313 - USB/LCD Meter * lifesfordeath - USB/LCD Meter CA Forums - * audio_phill - RTA with enlarged bandwidth to 10hz-22khz CACO Forums- * Team Aftermath - Robert - USB/LCD Meter Total - 17 Can we get to 25 for the ultimate discount?

hell yeah your 4 subs better be louder than the two. lol. Its more dependent on the box but yes the SEXs will be louder than the CVRs.

DD. quick question gets quick answer.

DC POWER over All.

haha.

lol. For real, I thought the woodworking looks great. Its just not anything extra ordinary than a ported box.

Why not get dual 2 ohm SSD instead? it would be cheaper to get an amp in your price range. And you sure you can fit a good size box for that 15" in a mustang trunk? Its a bitch to get any box in that trunk besides building it inside the trunk. And why are you gettin that brutus 1200d amp? That's not 1000 watts at 2 ohms. lol. If you're looking for a cheap amp for near 1000 watts at 2 ohms then get an Audiopipe ap15001D. You can get these for under 200 shipped.

new from crescendo comes with 2 year warranty as well so I doubt you would get 2 years transferable warranty with a used saz 3k amp. Or a used crescendo 3k 475 plus shipping and probably has warranty left. But it still isn't that great of a deal because its 550 brand new.

Why get used when you get the same thing with a crescendo brand new? Read impious' comment.

I kinda see him wanting loud over sound quality from the start. The BL will still sound good.

Knew it. lol. Use aeroport to save even more space.

If you're strapped for space, why get a 15" ? Should have gone 10" or 12". Also, 2.8 cuft is after port, sub, and bracing displacement.

There is still room for two more bottles. But more pictures I found a smoother 4" elbow so I used that instead and it came out to the exact length I need. I used tape, just in case he wanted to change tuning.

The last owner of the mustang had a nitrous kit and so the back seat is gone and there is a mount for the nitrous bottle and that's it. This is the reason for the wall. It makes it look a lot better.

All termlabs are going to meter a little different as well. One may be more loose than another. So just saying...