grumby13

why not go balls out and get the 88mm turbo

Show starts at 10am so is registrations

Hopefully I will have my new power and ground wire but will still be down on power since I'm having low voltage

The show is cancelled

with rock music mids and highs will be fine no need to get 12 inch or bigger subs or any subs in that matter

I guess I will get a battery bank but that will constist of two ofther batteries. So in the case I will stay at 12 volt I will just get a second bc2000d to have enouh power

Very nice for mine I went more width don't forget to send me pics to remove the rear deck speakers well the grille mainly

So what would be good to upgrade first wire or alt or second battery

I don't know where to get a reducer since my bc2000d can only have 1/0 max or was it 2ga. Quick question is it possible to get close or a little over 3k rms out of the bc2000d it can handle 16.8v max

Just don't know when right now will upgrade from 4ga to 2ga to lower the vdrop

I have one battery but will be adding 1 to 2 more do try to lower my vdrop and I'm running 130 so after the amperage taken to run everything I'm left with 90amps but will be upgrading that to either to 200 amps or adding a second 130 to put me at 260 which is 220 to play with

Right now I have 2 pa mofos 124x and its 3k rms and my amp is a bc200d and one ohm is 2250 and I want to know what my amp can put out at 14.6 since that is what my battery can handle up to

I'm gonna start competing

They are always on sunday

i need help to figure out how much power my amp will push out at different voltages. The amp i am using is a crescendo bc2000d and it states it will do 2250 at 1 ohm @13.8v. my question is what will be the power output if i were to put it at 14.6v and 16.8v.

what are the specs on the diehard might be interested

there is another glenn burnie md on the 7/21/2013 i will try to get the flier from matts page and post it.

my friend anthony is a cadence dealer

Anthony is bringing them this Saturday he got me a deal with 2 pa mofos 124x plus I made a new box 4.3 cu ft internal

Mathew from Glenn Burnie one posted that its the 28th. I know I will be at both Glenn Burnie on the 21st and 28th bear de I will be competing at both will have to break in new subs before Glenn burnie

the show was cancelled but waiting on what day it will be now. possiblity is 14 or 28th

not bad what are you putting in that

so i measured the box after it was built and it came out to be larger then 3.853 cu ft. it came out to 4.3 something cubic ft internal volume

thanks. well i will look at it when it comes back from the shop.

Forgot to ask how did you remove those speacker covers for the rear