Dexter Chaos

i was told if I went with this woofer and a full range I would be ok. now I am not. what changed

How did you figure it will not play over 300 hz it stated its response is 36.5-2000hz? and yes I am listening but am being told but with no explanation. I respect most on here. thats why i am here.

i have these Peerless TC6WD02-04 Silver Series 2" Midrange I could instal instead of that tweeter with the SLS.

Just so that its clear to "M5" I understand that my head unit will not suffice. I new this from before I even starting this thread. My thinking was I wanted to share what I currently had for comparisson reasons only, silly me. This is my thread I created and wanted to post MY units specs as well. I hope that your intellect and arrogance about audible noise is no reflection of who you are in real life just a mirage of how it comes across on the cpu screen. I inparticular came to this web site for everyones knowledge but you sir make it frustrating to learn sometimes. My 2 cents. end rant I wanted to share that I have chosen to install the peerless 8" SLS and Dayton Audio DC28F tweeter. After some discussion with a fellow IAK member on sunday he said the peerless was a proven winner and also with ALTONS advise I felt this would be a good starting point. Also after some googling and reading of reviews on the tweeter its not a superior model but has great reviews for its price point, its has rebuildable parts, & should be a good starter tweeter. This is where I will start. My current plan is to build and install my door pods then I will order the 80prs to truly move forward with this build. I will post results as I go. Thanks to all for the advise and any further advise in my crusade for a better sounding vehicle.

Also excepting offers. this guy needs some 4/0 wire 125fts worth

wish I had a 2ohm set up we would have to talk. Saw chicago fans sunday and man talk about efficient and clean. very impressive equipment here. GLWS

I have 3 items i wanted to put up for sale so here we go. 1. Audio control matrix 6 channel line driver 125 shipped basically NIB only had installed for 2 hrs. 2. 2-CT -Sounds 125.4 only a few months old comes with plexiglass bottom. each on has a small paint chip 250 each shipped OBO 3. 2-Sundown Neo Pro 8v2-4ohm NIB i got these in december and never installed of even hooked up. only opened boxes for pics 100 each + ship OBO

tuned in for sure.those look pretty freaking sweet.

you feel this way because of my current head unit? explain why? I realize my current head unit will not work.

i am using the alpine 137 currentl, these are its crossover specs High Pass Filter: OFF/60/80/120/160 Hz (Selectable)Low Pass Filter: OFF/60/80/120/160 Hz (Selectable)Bass Level Control Range: -14 to +14 dBBass Center Frequency: 60/80/100/120 Hz (Selectable)Bass Band Width Adjustment (Q): 4 Choices (0.5 =narrow, 1.0 = medium, 1.5 =medium, 2.0 =wide)Mid Level Control Range: -14 to +14 dBMid Center Frequency: 500Hz/1kHz/1.5kHz/2.5kHz (Selectable)Mid Band Width Adjustment (Q): 4 Choices (0.75 =narrow, 1.0 = medium, 1.25 =medium, 1.5 =wide)Treble Level Control Range: -14 to +14 dBTreble Center Frequency: 7.5kHz/10kHz/12.5kHz/15kHz (Selectable)Treble Band Width Adjustment (Q): 2 Choices (0.75 =narrow, 1.25 =wide)

So what do you suggest for speaker set up if not to go with a 8" and 3" drivers?

I have looked at the kenwood to. I haven't found much info other than shop videos on it. Has anyone used one that could give feed back on it

I am planning on purchasing an pioneer deh80prs this summer. As far as budget it's not limitless but I would rather wait and save up if I feel that there is a better option out there. I currently am running a ppi 900.4 on my cs set. Only running two channels of it currently. I will look into those speakers you mentioned and see. Alon, Compared to the tang bang or Dayton that I have been looking at, what types of differences should I expect between them? Thanks All for the advise

So I have been in desire of adding more midbass to my set up. Currently I am using the Sundown CS6.5 set up from only. I feel that i am going to damage the 6.5 that came with this set if I do not pursue an alternative to help cover this midbass I am desireing. I will be sealing up a fiberglass enclosure on my doors. I have been looking at a a couple set ups and was hoping for some advise. I am looking for a midbass driver that will run around 50hz and up not sure where my upper cut off will end at this point. I have been looking at three speaker on is called a subwoofer and the others are called midbass drivers. well here is what I have looked at: 1.Sundown SD8 this will run sealed on my door. If I choose this route I was planning on using two of these CS6.5 as well with this. 2.Dayton audio RS180, with the RS100, and a tweeter as well 3.TB w6, 6.5 midbass driver, with a 3 or 4 inch allrange as well and tweeter Both of these options I am looking at going with a 3- 4" allrange driver to cover the Mid-High end and adding a tweeter as well. I guess my main question is am I going to get the midbass out of the SD8 that I am looking for or would it be a waste of a speaker for this situation. I had odered these and will have to see If I can cancel if it is thought that I should change my direction of focus. I am incredibly new to this active type set up I am looking at going with. So the exact interpitaitons of how these set ups will work has just been choosen through reading on this site.

Did I miss it somewhere I thought you where going with the Dayton rs150,125, & 28f???

AWESOME!!!!!!!!!

video is private it states cant watch

I have a Gcon I used for 2 months sealed before my Zcons came if you have any interest in it.

did you look at there predesigned enclosure and should be able to see what they have set up on that box. this would point you in a direction.

Oh crap I didn't see they where the 2ohm version. Are you still waiting on the 3hole-4/0 inputs?

HBD ssa family

What these two guys said^^^^^^^^^^

what are the inputs for wire size?

I am looking for 4/0 wire. any recommendations for this type of wire. and where to get it

Got a local guy here in town who just built a center console for his back seats with 2-sd-2-8". He built it in a fourth order and put it in i will see if i can firnd the pics.