Big Reazon

I have a 1985 chevy el camino. I am contemplating on what to put in it for subs. the measurements I have for room are 20 wide x 10 high x 18 roughly deep and I can put one of these boxes on each side of the tranny hump. So i am stuck between a 8"and 10" sub for each side. I really liked my uncles 12w7 in a 2.25cube box tuned to 32 with a jl1000. I have a Rockford Fosgate t10001bd amp. I have put a 140 amp altenator in my car my stock one was 58amps. So my amp power should be good. What is a good pair of 8s or 10s that will fit in the space that I have ported that will hit like my uncles 12w7.

I guess I will have to fiberglass then. The I will have a little 2 cubes net per box. That should be plenty for the icon 10s. So am I good now or are my goals still not attainable.

No I have about 1 cubes net. I am going ported for sure so I should go with the icons over the q's and I should over power the one 12w7 with my 2 tens.

Alright we covered that I can get louder and sound clean. Now which sub do you recommend the icon or the fi q. I have a saz1500d on the way. So now is it the fi q or the icon. That icon looks like a meaty beast in a 10". But which would you recommend the icon or the q. About 1 cube a piece. Separate boxes. and all. So what do you guys think?

Yeah I have a space issues. Each bx can only be 21" wide by 10.5" tall And the subs go on the 10.5" wall its like sliding subs into a bookshelf.

I plan on making the quality of my install top notch. His is o.k cartoys custom quality. No prefab boxes they charged him 700 for the box since it looks like a center console. The box was built to jl specs internal wise.

Or would these be better for what I want. SSA ICON 10D1 I want a good street slammer I don't plan on getting on the meter. I need to out pound 12w7 and If I can sound better while doing it even better.

Alright to start off I'm new here and I am in no way imposing the w7 to be the end all sub woofer. Well it seems like everyone around me is trying to run the mojo of the w7. I want to sound better and get louder than my uncle. He has a 12w7 ported at 2.25bubes at 32hz on a pdx1000.1 this in my opinion is loud enough. I plan on getting two 10' q's. I am unsure on what to power them with. Probably a sundown 1500d. I can put the subs in boxes about 1 cube net I am not sure on what to tune it to. But Do you think I will be able to out slam his setup?