daboos86

Thanks for all the help. I decided i am going to do the big 3 upgrade, it should be helpful in the future when i upgrade my system anyway. Hopefully this sorts my problem out. I'll post my results once i am finished with pics vid's etc... Now all i gotta do is wait for it to stop raining

i have good 4 guage wires and a good ground. I have not done the big 3 and my battery is kinda crappy, my dash lights dim when the beat is thumping, could this be a possible problem for the fuses blowing? would a new powerful audio battery cure this? i used to have a capasitor which diddnt make much difference so could it be the ground on my battery? thanks again MARV

Hello everyone. I am having a problem with my amp and i am not sure why. I am running 2 in phase XT's (XTB212) http://www.inphaseaudio.co.uk/xt-range.php...;products_id=49 2 ohms X 2 1400 watts each about (900 RMS) I am running it off a 1800W Kenwood mono block amp http://caraudiosecurity.com/shop/product/p...ts_id/5745.html wired in parallel (1 ohms) but after i turn the volume up to a point BOTH the 30A fuses on the amp blows i used to run these subs at 4 ohms and they worked fine but at 1 ohms they are like 2X better so any idea's why i blow fuses at 1 ohms.... i am quite sure my amp is 1ohm stable.. i also have a distribution block to run my 2nd 2 channel amp (400watts) ANY IDEAS? thanks MARVIN