Thumpper

MAN..I'm glad I talked him out of the 15"

Correct me if im worng, he did that so when he puts the resin on it gives a space so the air can escape. correct....

this is a common chamber for a pair of T212D4 subs...2.25cf3 per sub plus displacements tuned at 35hz the baffle is not attached and the port is not finished yet but it's starting to take shape

right now my install consists of 1 Premier 980 blue tooth head unit 2 pairs of JBL 660GTI components 1 JBL GTO 75.4 amp 2 JBL W10gti subs 1 JBL/Crown BPX 2200.1 I have 2 more W10gti subs in boxes waiting till I get another BPX 2200.1 than I'll be making an addition to the set up

LMAO...I can NAIL 10hz with my 10" subs and flex the tops of my doors with notes from 10hz to 20hz with ease... here is Video of one of my Test Boxes with a 10" woofer in it MUgjacrYXt4 here is some door flex with the same 10" woofer dW0pfBQPJGY I have been able to nail 10hz with every system I have owned I was running this 10" sub with 1.60cf3 plus sub snad port displacement and 2400w rm

I have a formula I use for my port flares and the port length will change with more or less port area..I build all my enclosures with a low percentage of port velocity so the ports always end up big azz

a few more coats and some curing time it'll be wrapped in carpet

all cleaned up and asssembled Ya..they come in different sizes []

there is still some glue sticking out of the seems and the top needs to be attached but here she be I'll finish it off tomorrow

I'm not shure if he will compete with this box at all so it may never get metered it is tuned at 32hz..more of an SQ configuration than anything but it will be damn loud

the stuff is awsome,it has a good % of silver in it..the only problem is it has a very high melting temp...you NEED a really good soldiering gun for this stuff

completed and ready to ship

this is a seperate chamber enclosure for a pair of T112D4 subs 2.0cf3 per chamber plus sub,port and corner displacement

just contact me thru my link.. http://poundthatsound.com

yes it does....it effects the airflow to and from the port and also effects the way the woofer CUPS the inner cf3 his build quality is top notch though

this one is basically done... all I need is to silver soldier the pure OFC leads to the terminal cup and screw it in

thanx.... BTW I love your avitar....it's always been a dream of mine to be raped by a couple of HOT lezbians!!!!!!!!!!!

here is the inner Kerf..full of resin and filled like a nice smooth 45*

anyways this is how I make my flares nice and solid I use the holes to take advantage of capillary attraction..the resin gets drawn in thru the slits and the air bubbles come out thru the holes... this ensures that the kerfs are 100% filled and rock solid once the resin cures.... works better than any other way...glue shrinks and leaves voids in the kerfs..this way does not[]

thanx... on the average I build 1 to 2 enclosures a week and have been doing so since 1985...more than I care to remember but it keeps me out of trouble