munchies

Thats strange I thought that I had put a note in there with my name and return address in there, and let the UPS guy know that it had to be in the package...UPS store ftl I guess. But thanks for getting back to me Nick, I appreciate it.

wow I hope my situation doesn't turn into something similar to this. good luck

next day afternoon bump

good night bump

Can you let me know if my 12'' Q arrived to you? UPS says it got there the 27th, I emailed you on the 30th to verify that is the case. [email protected] Nick Cowan 12'' Q with 2 broken tinsel leads

Well the solder isn't holding up and I think it would just be easier to send to the sub back in for repair. Anything else I should include before I send it off?

Big in terms on gross volume, but most of it is port so net volume is around 2.2^3

I'm too lazy to type another thread so I'm just going to post links Pics and vids here: http://www.caraudio.com/forum/showthread.php?t=293273

So I tried to solder it and so far so good. Thanks Scott!

bump

Thanks shizzzon Anyone at Fi have advice for me?

So yesterday I finally got around to making a new box for my 12'' Fi Q D2. The box came out great, but when I went to put the Q in I noticed one of the tinsel leads was broken at the end where it connects to the terminal. I'm not sure how or when it happened. The gain on my amp (US amps XT4000D, 1500rms @ 1 ohm) is set about half way up and the bass boost is off. My question is what can I do about this? repair it? send it back for repair? Any help is appreciated, thanks

bump

Its frequencies between 30-37hz that are lacking

Both the sub and port are facing the rear of the car. I thought the ssf was the problem at first too but now it's set to 20hz which is low enough.