Anthony Collova

There is a Second Skin forum now? WTF?!!? Who let these asshats in?

I don't give a shit... Rick is a nice guy and sells a decent product. Doesn't look like you came in here to stir the pot. Just didn't know where you were when you posts. No big deal to me.. Besides, Raammat is no threat to Second Skin. Thanks to the other guys for stand up for Second Skin though! Much appreciated To answer the OP, a mini truck will usually burn through 80 to 100 sq feet of Damplifier or Damplifier Pro pretty quick Some of our competitors eat up 160-200 sq feet.. I think that is a but much but it is their money. ANT

If you are going to compare similar products you should look at our entry level mat, Damplifier, not Damplifier Pro. Dynamat Extrme 1.67 mm thick .45 lbs psf 4 mil foil 300 degree heat rating Damplifier 1.25 mm thick .45 lbs psf 4 mil foil 500 degree heat rating. Damplifier is slighty thinner than Dynamat Extrme but weighs the same. This is becuase we introduce a defoaming agen in to the butyl while it is blending and re reduce the air content from the formla. Since there is less air bubbles in the adhesive it is very dense. If we wanted to, we could leave the machine on foa few hours longer, and not use the defoaming agent and we could easily turn a 100 gallon batch of butyl adhesive in to a 150 gallon batch. Then, we could apply that to the foil at a greater thickness and could make the claim that our product is the thickest around. Problem is, there would be no difference in weight. so even though a the product is thicker you don't get any better results since there is just as much material as the thinner batch. This is why we often encourage people to compare the weight of a product rather than the thickness. Obviously there is more to vibration damping than just weight, but the more it weighs per square foot, the more you get for your money. Look at Damplifier Pro. 1.75 mm thick but it weight .65 lbs per sq foot and has a 6 mil foil heat shield. Nothing in the industry comes close to those specs. ANT

Glad you guys like the video! We just recentlyk santioned Buzz and his crew to film all of our installation videos for the Second Skin Web site. Expect to see some pretty informative clips in the next few months! ANT www.damplifier.com

Hazmat? It has been over 2 years since we sold that stuff. We only sold a couple batches. The butyl has a shelf life of 18 months, but can last for longer in the right conditions. Once installed it will go clsoe to about 15 years.. Hard to say... ANT

Looks awesome! Glad you were able to get the stuff in so fast! ANT www.secondskinaudio.com

If I am invited, and in town, and not busy, and dont have a bad case of shits.. COUNT ME IN!!!

Thanks for the warm welcome guys! I am glad to be apart of the SSA family! If anyone has any questions about Second Skin or sound deadening in general, don't hesitate to ask me. I can be reached toll free at 800-679-8511 or email me [email protected] I'll do my best to check in with this message board daily, but if you really need me, email is best. Thanks again for all of your support! ANT www.secondskinaudio.com

How so?

Ta da!!! ANT www.secondskinaudio.com