388chevy

Whats everyone running for splitters? i have a Kenwood head unit with 3-preouts and i have them ran to my Clarion Eq which then runs to my soundstream amp. My problem is the shitty walmart splitters aren't holding up whats a good set of splitters to get?

Ok thanks for the help

Mine has IN +- Mid +- and TW +- how do i go about wiring this to the amp?

Just bought the crescendo component set and it may sound stupid but i don't know how to hook up the crossovers any help would be appreciated

It works when I switch to aux but when I switch to radio it doesn't. Also it doesn't have a main input did I buy the wrong one?

First up i bought a decent power acoustic equalizer off amazon and hooked it up but it doesnt work when i turn the head unit from aux back to radio, it has cd/aux rca, sub rca, and front/rear rca's so i have it hooked from my head unit to the amp and back to the equalizer is this right? Second question probably is a stupid one but i bought the nice crescendo 6.5" component set and it came with crossovers, are these needed if i have a equalizer? if so is there a diagram on how to wire the crossovers to the mids and tweeters? thanks in advance

Got 141.8 db with both doors closed windows up

Thanks Here's a vid i'd turn the volume down sounds like poopy

Straps yes working on getting some, power cable is deff fused i mean who doesn't fuse a power cable with that big o cable? Fused, good. No grommets/strain reliefs, bad. Only a matter of time before you're doing it again. Who doesn't fuse their power cable? More than you think. Watch the news for car fires, there you go. If it's worth doing, it's worth doing right the first time. For future referrence, 0gs, isn't big that big of cable. Suit yourself, it's not my truck. Always people hatin' and theres not much strain on the wires the holes were drilled with some room to spare

Straps yes working on getting some, power cable is deff fused i mean who doesn't fuse a power cable with that big o cable?

Just finished this up for a friend nothin fancy it's a budget build and it slams, it's one zv3 12" in a ported box with a crescendo 2k 0ga all the way to the battery has two batterys but the one already took a shoot, has a digital volt gauge and it drops below 10 on a low note but anyway here's some pics it gets the job done With the seats out Is fully sealed, no leaks that i could see so far

it is with the airspace you have and the number of subs at this point. unless your saying that its output is no where near its rating, with two more 8s you will still have too much volume but it will help..... you seem resistant to take advice at this point... but you can take up some volume simply by using expanding foam. Resistant? I'm not being resistant i don't get on here much to check the forum i'm listening to everything people are saying

There is a plan for two more 8"s and the planet audio isn't really over kill

i dont follow you ... thats whats the trunk space called for? explain Wanted to fill the trunk space

It's what the trunk space called for, tuned at about 30 hertz isn't crazy power

Finished product, lets just say the amp isn't 2ohm stable like it said

Almost done, ill have finished picture tomorrow it does sound great im impressed for two cute lil 8's

Indeed, 6" i think is what it was

No longer have the dimensions sorry but it came out to be like 3 cubic feet

Heres where i'm at so far, it's about 6.9 cubic feet, 3" port, tuned at around 29 hertz give or take

Got another box underway being built for an older for escort, 2 Sundown SD2-8 going in a ported box powered by a planet audio 3k. Stay tuned for pics

Finally got it done, turned out pretty decent

Got the fleece stapled down but it's too rainy and humid to do resin today

Got bored and have lots of wood to work with so figured i'd make a box for the big bear, 4 - 6.5' boss marines and a ssl200 amp no headunit, goin to upgrade the speakers soon to crescendo 6.5" cause there louder and nicer heres what i got so far This is the amp i will be using, a ssl 200 watt

Thanks