dustin420

yep just like i figured each team will win their home games, so if LA wins theirs goes up 3-2 then game 6 should be the most entertaining either LA will get dominated then come back for game 7 or LA will sqeak out and win it all. but i have been wrong before so.

what do you want to know? the ava is a crazy low end sub, more designed for home audio but will work in car. only needs around 1200 to reach max, thermally it can take a little more but mechnically 1200 is around its limit. put it in a sealed box and you'll have a low end beast which almost nothing will mess with atleast not just a single woofer. output wise it'll be loud but i woudldn't expect 150 from it probally a mid 140 would be a good guess score wise. sq well everyone views will be different but it is xbl^2 so that should say a lot, although i have heared that it falls off above the 60hz range but your mid bass should be taking over by then.

the rl-s is a beast, i remember chad on the ecoustics forum had 2 15's with a kx2500.1 amp walled in a civic sealed and was doing like mid 140's at on music iirc. but ya the main resaon no one has them is cause of the coil ohms and box size. last i knew their was an AA avalanche 18 on ebay might wanna look at it although it only needs around 1200wrms to get moving.

are you still looking for a sub? if so i have an AA atlas 15, xbl^2 motor, svc4 ohm but has another coil to adjust the qts. will work perfect sealed or ported. 350w would be enough for it although in a good box it could take around 500. let me know if your interrested.

well either way nothing you can do about it. it won't affect anything so i wouldn't worry about it.

no its fine, after imp rise it'll be close to 1ohm anyway.

"In 2003, 2006, and 2007 Montpelier won the Berkeley Springs International Water Tasting competition for its municipal water supply. Montpelier triumphed over cities as diverse as Sparwood, British Columbia and Rice Lake, Wisconsin.[4][1]" http://en.wikipedia.org/wiki/Montpelier%2C_Ohio my town has the best water in the world. haha.

i say lakers in 7. the celts are good but they had problems facing the cavs and lets face it all they have is lebron. the lakers have kobe plus some others that are good i don't think the celts will be able to stop them. it'll probally go back and fourth with the home team winning then in gm 7 the lakers will pull away. but i also thought detroit would win in 6 vs the celts and i was wrong so.

also another thng to look at i the subs qts value, don't get one thats super low or else your sealed box will have to be huge or it'll be peaky. If i were you i'd look into some SI mags. i hear that they excell sealed and will get plenty low enough.

"Power Handling RMS/Peak: if you need to ask

kinda OT but never seen a "real" pic of the z untill today, enjoy. http://www.hexibase.com/forum/viewtopic.php?t=2883

nice steve, finally soemone whos heard both and can give a fair judgement. on the screws have you thought about using t-nuts? i use them in all my boxes, you don't have to worry about the wood coming fatigue after repeated un-screwing plus they allow you to use different types of screws say hex head, for a more security perspective.

funky pups own all

whats their email? i tried the dealer address on the site and i never got a response back. also tried FI and didn't get a response? what else should i do? anyone? i emailed AA and FI again so hopefully soemone responds this time.

It doesn't say that in the specs you just posted. I am not sure what Sundown is using on the SSF. um ok then what does "24dB Octave Crossover Slope" mean? it says 2 lines above where i said it? and i got the specs right off this site? That is for the crossover, not the SSF. hmm i allwasy thought they were the same for both? i know on my 12.1 its that way.

it would probally work but imho it would be a waste of time and money.

interresting, me personally would rather have someone else lick my nuts but hey to each their own.

whats their email? i tried the dealer address on the site and i never got a response back. also tried FI and didn't get a response? what else should i do?

It doesn't say that in the specs you just posted. I am not sure what Sundown is using on the SSF. um ok then what does "24dB Octave Crossover Slope" mean? it says 2 lines above where i said it? and i got the specs right off this site?

nice!!!!!

anyone believe in this? if so what do you think you'll become in the next life? if it happens to me i want to become a mongoose, haha i know random but i hate snakes with a passion and mongoose kick snakes ass so ya it will work out in the long run.

SPECIFICATIONS: Type Mono Class-D 1500 watts x 1 1 ohm 800 watts x 1 2 ohms 400 watts x 1 4 ohms 3000 watts x 1 2 ohms (Dual 1500D's) THD at 4 ohms <0.1% S/N Ratio >90 dB Input Sens. 200mV - 6v Freq. Response 10 - 350 Hz Fuse Rating 40 amps x 4 Dimensions 17" L x 9" W x 2" H Warranty 2 years Efficiency : 86% @ 4 ohm, at 100Hz Double Sided Through Hole Epoxy PCB Daisy-Chain Through Output RCA 24dB/Oct Variable Crossover Multi-Way Protection Circuitry (Thermal/Over Current/Speaker Short/Speaker DC Protection) Variable Subsonic Filter Variable Bass Boost Variable Low Pass Filter Variable Phase Shift Zero(0) Gauge Power Supply Connectors Tested Voltage & THD : 14.4V & Less than 1% THD Operating Voltage : DC 10V~18V Digital Class-D Linkable Mono Block Amplifier 1 Ohm Stability RCA Line Input and Master Output 24dB Octave Crossover Slope Wired Remote Controller it has a 24db slope.

yep what M5 said. just adding when a sub goes below tuned hz its called unloading, its essentially the same as ruuning free air with all the power a sub can take thermally which useally allows the sub to have crazy excursion. also just because for ssf is set at 30hz doesn't mean your sub can't play lower then that, all the ssf does is have a negative DB slope beyond a certain point so depednign on the amp it could have a 12db slope or 36db slope just depend on the amp.

from the pics it looks like a 4th order BP? if so get us some specs then we can help.

because to fit a 15 it would have to fire up at the trunk lid and i hear that is the worst position for spl. i think im gonna go 2 12's anyway try them sealed at first then just get a design from pete if i ever want more output.