NDMstang65

Pick out the amount of airspace that you can fit in your car and you can work with. Say you pick 3 cubic feet for example. You then should have anywhere from 36-48 square inches of port area. Then use a port calculator to tell you how long to make it to tune it to your desired frequency. So long as you stick within our recommendations you are in good shape for daily driving!

SSD's would do fine... Fire the subs forward on a angled plane and put the port in the top of the enclosure. As long as you follow our guidelines for enclosures in the tech section you are good to go for daily driving. Thanks! -Nick

No need to, we have dual 1's available which give you the same wiring option as the dual 4ohm coil (2ohm final nominal load) Thanks! -Nick

I want a cut sheet with mine.

Motor will have to be sent in to machined... TC rates their stuff how they rate it, we rate it as to what we think is realistic on a daily driving scenario. IMO you shouldn't need more then 12-1300 watts, anything more then that is wasted heat and strain on your electrical system. Thanks -Nick

I suggest staying away from that amp if and all possible

I'm on my phone now. I dont have a price list on here, but it's easy to do it yourself. all you have to do is glue down the spiders to the spider landing and the surround down to the surround landing and solder the tinsel leads to the terminals thanks nick

We say 750 watts for the standard, and 2-400 additional depending on scenario 'loaded'. However if you aren't careful you will break it. Thanks -Nick

Copper coil option... Follow our guidelines in the tech section for box recommendations. Thanks! -Nick

Pointless to go with the BTL, we rate the SSD's at 750 watts rms...go with them. Thanks! -Nick

No pictures Sorry.

Severe acid trip i believe...they showed back up about 15 minutes ago and i have internet. Go figure.

So i've more less disappeared from here due to not having any sort of internet access...our internet went out on Friday, and has been down ever since. Everybody that has emailed me that i have gotten i have replied to, i don't have a clue what is going on on the forum, so questions here will be answered as soon as i can get back to it and get everything under control here on the home front. I apologize for any inconvenience that this may have caused any of you. Thanks for your patience and understanding! Nick Morgan Fi Car Audio

3-4 cubes per is ideal..

Scott's at sema...nothing i can do right now man.

Lol.. Wait until sick twisted minds get together

BL with cooling imo. The 1500d is too strong for the Q.

If your stupid with it yeah you'll break it. If you are conservative, tune your subsonics in the right places and don't do anything retarded you'll be fine. Nothing wrong with headroom.

Too big...stay within our recommended specs!

Should be louder with more port area... That's really not enough, and why your experiencing noise...

Don't use winisd . Stick to our enclosure recommendations in the tech section and your good to go.

No, we can't do the 2006, told you that already, sorry man.

I'll kick you in the kankle tommicus. No love man...no love.

Recones for sx 18's are 90 a pop baskets are 38 a pop plus shipping to where ever you are. Thanks -Nick

Sorry man we can't do it.. Thanks -Nick