NDMstang65

I wouldn't run 4kw on a Mayhem..especially daily. That's just asking for trouble

Believe I will be attending.

Displacement actually needs to quadruple to maintain the same SPL level one octave lower. At one meter; SPL = 102.4dB + 20log(Xmax) + 20log(Sd) + 40log(Freq) or SPL = 102.4db + 20log(Vd) + 40log(Freq) Brain fart, you are correct sir. Either way..dude needs a LOT more then what he's got for something to be just as loud

Just a suggestion..because you missed that you are going to have to have some MAJOR electrical system upgrades if you do a BTL. ..Why not do a single SSD 12? or 10?

Cone area and displacement reigns supreme.. If you want more output stuff 2 of them in there. You aren't going to get a perfect alignment in a car either way you go..but regardless of who wants to argue and get anal about something. As much cone area as you can stuff in that thing is going to be the loudest, regardless if you don't have 10x the VAS for volume. It will sound fine...done it numerous times myself and plenty of people have as well.

$35 to redo the motor..that's if the magnets are not cracked. If they crack it's pretty much junk as we do not use those magnets anymore. You can send it into us and make sure you package it properly..all of your contact info needs to be in the package and we'll contact you when we get it rebuilt. Need to have your Name, Address, Phone Number, Email address, What you are sending in, What needs to be done, What it needs to be built to etc. Frame size, Coil impedance, and Dustcap color.

A recone will fix it fine..the only problem is if you throw it right back where it was then it is simply going to do it again. Speakers are stupid..they only do what you tell them to do, that includes committing suicide as well.

Nothing wrong with running the High Qts version in a ported alignment...it just turns the sub into a Mid Qts woofer instead of a Low Qts woofer (which btw sounds horrible in sealed)

..and clipping the piss out of it..

The pole will not shift..there is a bolt going through it. The top plate is shifted or the backplate is shifted..if the magnets are not cracked we can do something with it. If they are cracked, you're screwed. We do not have any more of those magnets.

Probably the enclosure.. You do understand when you drop an octave to reach the same output level your displacement must double right?

ahahhahahahaha

I've never got an email from you regarding a mayhem to there..

Has nothing to do with XBL.. You're just buying a brand name that is..well..dead. lol

That was weeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeks ago

gotcha

hangin out...hop in grab a beer and shoot the breeze

We've got some 12" ones...email me your address.

It probably doesn't do 2500 watts.. Regardless, if you abuse it..they'll break. Knob happy is not the way to be

Sure...you just want the logo?

Won't hurt a thing..just is not going to sound optimal.

Beginning to fight a cold...been a rainy nasty few days here on the east coast...up to take a dose of emergen-c and figured i'd hop on here since I wasn't here this evening.

As stated...use Goop or Windo-weld. Do not just get any regular silicone..it does not bond to the surround material. Goop, or windo-weld does. DO NOT put it on thick, a few thin layers is all you need.

No there is a dealer in Martinique as far as I remember. If anything is on ebay..it's bullshit unless it is a private seller. Especially in the US. Other countries we do not regulate it. In the US we do. Link to said auctions?

Hard caps stay on waaaaaaaaaaaaaaaaaaaaaaay better then the flat caps do.