NDMstang65

Thanks

There are holes. Watch..learn...please do not drill new holes.

Sounds to me like you need to crimp your connections properly. Anybody who works for the local power company would have a set of proper crimpers. They're about 3 feet long and if they have the proper dies they can crimp 4/0 or 500 MCM. Large Compound Action Crimp Tool - Klein Tools 2006

we can recone it with parts that actually work properly..

Why not put it in a simple ported enclosure tuned low?

Ah..that's 4 hours from where i'm at..I won't be back on the east coast again until August or so.

What part of Virginia are you in? I might have some old stuff laying around that would probably fit the bill better for you..

It'l probably say fi car audio ooor maybe hot speaker direct to you... oorrrr maybe hot girls direct to you (you have to have been into vegas to get that one)

IB woofers are not meant to be loud..if you are going for output then you are looking in the wrong direction. You have to have massive amounts of cone area before you get to the point of something being as loud as a sealed box or ported enclosure. Most guys who run IB in a car are going strictly after SQ..and that's really it.

Hot girls direct to you. dot com.

It's infinite baffle..as in you do not put the sub in a box. It's rated at 550 watts at 20Hz, which means..IB..you can run about that much power to it until it bottoms out.

Thats Ontario California, the main UPS hub for the region.

Sure it is so I don't get bitched at for not answering email because people have zero patience

No such thing as vacation ..and i'm just disappearing..only to appear when i appear again..

Disappearing for a while from the land internet..I won't be here or around email for a while..so if you email me and don't hear anything back..that's why. Thanks!

How much are the amps?

For the record..we do not make SPL subs. Every single sub we make is made for music...some are simply more extreme than others.

No it wont. Just because you have a tracking number doesn't mean anything has went anywhere. It just means your order has been assigned a tracking number. Nothing has shipped anywhere until the tracking number changes from "Billing information received" to "In transit" UPS bases ship times off of when the ticket is printed.

Because it is wired properly now instead of shorting a coil out lol The subs are stiff when you get them..don't be scared of it..they'll break in over time.

Um...why do you have 3 wires? Take the wire that is in the black (negative) terminal in picture number 1, and hook it to the red (positive) terminal in picture number 2 You then have the red (positive) terminal in picture number 1 with no wire in it, and the black ( negative) in picture number 2 with no wire in it. That is where your postiive and negative hooks from your amplifier... You've got some coils fighting each other I think..if you have this hooked up in "series" as i've described above there should be ZERO reason as to why you have 2 pieces of speaker wire in 1 terminal block. Each terminal should have 1 piece of wire in it.

Take the sub out of the box and take a picture of the terminals with the wire going into them like you say you have it.

Not to tell you what to do or anything..but you can buy a brand new one for 110 bucks from sonic electronix.. If we could do it you'd have more money in shipping and just a ballpark figure of $85 for the recone parts..if we even could build it.

You're probably running on a stock electrical system too... Those coils are wound on a machine that has a very specific length of wire that is calculated to be exactly .75 ohms. You are not going to have one coil .5 ohms and one .75 ohms...it's impossible. You cannot put that kind of power in a stock car with a stock electrical system and yank the gains up and expect magic to happen... It takes power to make power.

the only thing that is better is those who email somebody @ficaraudio.com and ask what is your website.. ..i reply..perhaps ficaraudio.com? might try that one.

Fair enough, do what works well for you. I just won't condone anybody that buys our product to model it and use it..because it ends up a terrible tragedy of broken stuff because of stupidity. Trying to get somebody to keep their packaging material and figuring out what a subsonic filter is...is simply hard enough as it is.