NDMstang65

We have nothing to do with RE. It was formerly owned by Scott..and that's where it stops...what they are doing now is their own venture, it has zero to do with us.

It's not a 'rubber fix' it would be an entire drop in recone assembly. You would either have to ship the sub into us or we could send a recone kit out to you. The standard SSD kit is $65, if you went with a flatwound coil it would be an additional $20, If you went with a copper coil the recone kit would be $70 If you have the BP Power option the recone kit would be an additional $10 Plus shipping (if the kit is sent to you figure ~12-15 dollars depending on your loccation) Otherwise the silicone should last fine, it just isn't going to be pretty. If money is an issue then I would probably leave it alone until it completely breaks... Thanks! -Nick

Yeah man, it's done..kind of.. We just can't find a dustcap to cover the hole back up in the cone.. Scott said that he had tried to contact you probably 4 months ago and see what you wanted to do but never heard anything back... Let us know.. It works..there's just no way to cover the ugly gaping hole in the front of the cone...

Hi Can i please have a copy of the BL 12' specs..webbie is down.. Need to start buying wood hope you guys arnt part of the storm struck area's Shouldn't really need them, just follow our enclosure guidelines in the sticky section above. http://www.bladeice.com/blseries.php There's the parameters!

I already emailed you back I believe. Let me know if i didn't! Thanks! -Nick

What coil did you have? Is it the new BTL?

Sorry man not going to happen.

Dual 2 and wire in parallel. Thanks! -Nick

You should have it now.. Thanks! -Nick

I don't have any drawn up and I don't have time to draw one up for you right now... About the only thing I could suggest is shoot for ~1 cube ported after displacement and say 15sq inches of port, or a simple 3" aero port say ~12" long would work ok. Just re-check the length on it as I am totally going by instinct on that one with respect to tuning frequency.

We pulled them off of the site due to being out of magnets... We'd rather not have anybody order them and we have their money and them not have the Subwoofer(s) in a timely manner. Thanks! -Nick

It's in the process...just takes time

Email me with your name address and location (assuming that you are not within the US) and i'll get you taken care of asap. Thanks! -Nick Nick " at " ficaraudio.com

Haven't heard anything out of you?

Email Am Singh as he is our distributor for the UK and Europe Sales 'at' bladeice.com Thanks! -Nick

Bumping this up..hit a few of the high points. Again, if it is important PLEASE email me. Thanks! -Nick

Your looking at a very expensive electrical system, 1/0 wire, HO alternators, big ported box, added weight to the vehicle, expensive amplifier...etc etc. I'd suggest that you not go with a BTL and look into the other lines as you probably don't want to spend all of that money on everything that goes along with running the big subs. Thanks! -Nick

Sorry we uphold our QC specifications like none other. There are many companies out there that will let things fly, it has to be within our specifications or it simply will not go out the door. Because of this it does cause delays from time to time, however it is worth it from a consumer standpoint. You don't have to worry that you are getting a product that is not up to snuff . Thanks! -Nick

That's what shipping would normally be throught he postal service..we already include shipping with our subs..so we credit them..

Redline..you either had a dirty gap or you didn't center the coil right is the only thing that will cause scratchyness... Need your email address or get it to Scott..we'll scan the label that we mailed to you again and you can print it out and slap it on the box. Please email me asap. Thanks -Nick

As of late I have no time for the forum right now between my research job and school and tons of other things going on I simply no longer have time for this. Many other things are needing my attention and the forum has to take a back burner for me for a while. I'll be around periodically, but don't expect a quick reply to anything from me...I am not picking posts to go through or holding bias to anybody by replying to a thread here and there, i'll have a minute here and there and reply to and that's going to be the extent of it. Sorry if you feel that it is not fair... The best bet is to email me and I can help through there more efficiently, other then that pretty much every answer to any question is already posted here or in the technical section. Feel free to email me and I will get back to you as soon as I can. Nick " at " ficaraudio.com Thanks -Nick

Ok.. Sorry, i don't sit here all the time..pop in once and a while when i have a minute and that's that...searched through my inbox and never got an email from you..

Dual 1's wire to 1ohm as well...series/parallel.

Check out the tech section: http://www.soundsolutionsaudio.com/forum/i...?showtopic=7155

Q's would probably be louder musically.. As far as making it fit it'd be you, a tape measure, a calculator, a pencil and a piece of paper to figure that one out...