RustyWCA

152's @ 25 hz

Thanks guys!!! I try =]

I use birch for my box. I bought 40 sheets =0 and i think somewhere around 40 or 50 bucks a sheet.

Nice add Drew =]

you have PM

NICKS GONE MOONPIE CRAZY!! (inside joke) Nice sale man!!

Denim gives it the stamp of approval =]

Thanks!!

So we currently have a less than 1% failure rate on our subs BUT people have asked for it so here it is. The old way The NEW way. Were sewing these on ourselves so they are kinda time consuming, this is why they are only going to be on the LV4's, XL's and LV5's. Singles on the 4's and XL's and the 5's will get doubles and for the 5's

It was a sampson

10's will be hard to come by since the motor is 10.25 in diameter... Over sized basket will help make it happen! LOL I need a pr of 10's that can take 4-5K RMS to complete my project! :bigclap: damn thats alot of power =]

re-cone ftw =]

I dont know if its the best but i use Birch on my boxes

Thanks man, No prob

Shot a custom purple with A lot of Flake in them to match the box =]

155.8 @ 30Hz

8 DC Audio LV412s and 12,000 watts of fun times 3 victims

So same set up as befor, 1 Amp 1 Stinger 1700 2 DC LV4XL10's --- i dident clamp it so i dont have a exact number, just guessing off the last set up and clamped power i say around 4700 watts but again i dident clamp it so thats just a guess

4 LV518s and 1 hifonics amp, did a 159.6, not to bad. the loudest its been befor with just the 1 amp in there with other woofers ive tryed is 158.6 so +1 db =]

Do 1.5 each with about 20 Si of port per sub, 1200 watts will do nice =]

3 Cubes, tuning is up to you but I do do around 40 Si of port

Wheres the pics