lithium

budget?

i wait for ubid.com to post them up. they are refurbs but the kx that i ordered works great. im pretty sure they are listed. some sites on ebay have them too but ill try to stay way from them. unless i feel its worth the risk. ill try to go with the 150.2 im i right to go with another run of 4 gauge? or would a run of 8 be enough?

i think i saw someone use 3 psu's 5v rails together...

is it ok to mix amps? ill probably keep my kx250.2 which is rated at (310x1 at 4ohm on the birth sheet) like ~90 x 2 at 4ohms so i could use that for the mids and im looking at a kx150.2 for the tweeters for like 70. shouldn't be a problem right? also for the wiring i have a run of kicker 4 gauge right now. so im thinking about doing another run of 4 gauge. im going to need the another run anyways if i ever decide to run a stronger amp for the sub. right now i have a kac-x10d (600rms- 40 amp fuse) and the kx250.2(40 amp fuse). adding the smallest amp(kx150.2) it would put me at a total of 105 amps. i guess i could get away with that... but id rather run a 200.2 (only 10$ more then the 150.2) and later id like to add something like a 500.1 or 750.1 for the sub. (i mention all the kicker amps because i found them on afew sites for pretty awesome prices and with warranties) i found a krukonceptz klm 4 gauge kit i also need some RCA's i figure i could use the ones that come with the kit above instead of the monster cable rca's i got from walmart... but i need another 2 sets so im looking at these RCA's the total for these are about 58 bucks shipped. can i do it cheaper with a similar quality product?

what kind of power should i be looking to run to these? i got a kx250.2 thats 85x2 at 4ohm. ill need another 2 channels yet. so should i go for more power to push these or should i do the same amount or use a smaller amp like a 150.2 for tweets? another possibility is selling my 2 channel and getting a 4 channel. would a 350.4 work ok?

i wish i didnt have other thing to work on. id be all over this sub. great price and great product. thanks for the review.

what kinda of magnet did they use? its so small?

awesome pics by the way. those are some sexy ass speakers!

no problem guys. im pretty confident i wont have a problem mounting them in my doors. ive got afew thing to take care of before i can order. ill post the results. thanks for your time.

alright sounds good. if you got a rulers or tape measure could u get me the overall diameter and mounting depth. if not no problem.

alright no problem. not looking to make the purchase right now. got a few things to get in before i need new speakers. i'm still very interested and ill email you soon. thanks again for your time.

any news? pics? guess ill pm nick. its not really a big deal since i dont have the money right now and i understand you guys are pretty busy. ill pop off a pm over the weekend if i dont hear back. thanks

any news? pics? guess ill pm nick. its not really a big deal since i dont have the money right now and i understand you guys are pretty busy. ill pop off a pm over the weekend if i dont hear back. thanks

ya im still debating if i need that much... it will cost me like 30 bucks more for the rammat because of shipping.. buts it is like 20 sq ft more mat

i could get some of ed's deadening. i can take that with me when the car dies lol

sounds good. i just looking at some sound deadening options... im thinking 40 sqr foot of damplifier for the doors.... i dont think car needs much more money put into it. especially since im unsure if the car will last. the engine is in great shape but the tranny maybe on its way out... not sure what ill do when that happens. so puting 200 bucks worth of damplifer in it isn't very appealing. with the trunk already deadened already. atleast i can take the rest of my equipment out.

where would i get some of that foam you used. for the doors/floor?

lol i did that with some adapter for my dad's truck (straight cut to splint a piece of 3/4" mdf in half). i dont think our band saw is tall enough to do anything over 6"... ohya very dangerous!!!

Nick is also your dealer. . . I am going to run Morel MDT-12's with my 7" carbon fiber mids. . . Brian guess ill see if nick gets back to me then. those look like some nice tweeters too. and the price is also very reasonable. im looking at some build logs and i think i see how im gona do it (woofer mounts). personally id love to try some fiber glassing but i think ill just fab something out of mdf. saving money here and there will determine whether or not i can pull all the equipment together. otherwise i might have to wait till the summer when im out of school... i think ive found some buyer's for some of my old equipment. so its just a matter of time.

my parents are kinda put off by ebay so im trying to fine a good deal on an online store... ill work on that closer to xmas. maybe ill have them buy the speakers, amp, and deadening and ill go for hu... either way its getting done.

still looking for the hu. leaning toward the Pioneer Premier DEH-P800PRS or the older model if i can find it... gota get closer to $300. alpine's hu is also an option. the idea is since i still live with the parents (freshman in college) i can have them get me the hu for xmas. and i can sell my old one and get the amp. sell my PG rsd's components have money towards speakers. etc.... i should be able to pull it off. also buying myself some sound deadening for the doors... xmas/bday present to myself... lol

very nice tweet. ill keep it in mind. what kinda of power do u run to it. currently i have a kx250.2 and im looking for another 2 channel of course. when doin an active set up does it matter what amps u use. i have a site that i can get some pretty cheap kicker amps. but not sure if i can get another like i got... selling mine and get a 4 channel is an option aswell.

those mounting brackets gave me an idea for when i try to install new speakers in my doors. how did u cut the angle that u masked off?

:angry2: :angry2: what terrible luck. sorry for your lose.

thanks alot nick, id really appreciate the specs. i can get a 7" in there no problem. still waiting on the pricing. i remember all the great reviews of the old poly's. cant wait to get working on this. zip is 17847