orange_soul

thanks alot for the info. i gonna build 2 box for my car, one with the port in a side (just to try it ) and one with the port up subs up, i gonna make a 6inch ring port sistem, that make me change easy the tune.

wtf thats to much hp to that tiny car and that pretty small engine. yes it is a hatch but a 4 doors version. thanks a lot for that info

63hz my vehicle here in mexico is chevy by chevrolete y 4d version. http://www.diautos-chevrolet.com.mx/chevy%20lateral.jpg

this is the memphis mojo i buy http://ampguts.realmofexcursion.com/Memphi...0D/outside1.jpg yes just burping. i instal the pair to day with a memphis mclass the old one just to see it work http://ampguts.realmofexcursion.com/Memphi...0D/outside1.jpg how much 3ft fo you recomend?

i wanna strictly a competition setup. i have a mojo 2k old school, i know isnt alot of power, but i wanna begin with that and then, growing up the sistem.

I just buy a pair of RE from the SE 10" DVC 4ohm and i wanna a ask you for your recomendation of power for does to subs. how much power i can use to make it burp with out burning them? and last, how mucho cubic feets i make the box for spl use? thanks

how do you see the net volume off the box ? big, small, ok ? any more advice

how many lines do you recomend me to put ? i have 2 for + and 2 dor -

i'm neer im from saltillo dude, i wanna make 150 with 2kw i will make my best to try to make it. i see 150db with a same amp like mine in a 2 doors peugeot & 2 p2.0 of mmats.

nobody else?

some more advice ?

i think it is, here in mexico the model is chevy this is an image is the same as the opel i think so. actually the box is all redy made, i put in 2 10" kicker cvr dvc 4ohms and a memphis mojo 2kw old school att 1 ohm , my wiring is 4 lines of 0 Gauge 2+ , 2- i make 144.1db with the oem battery. the subs do not support that power is to much in the 8 burp smelle like hot cake i will put a pair of RE SX DVC of 2ohms to put the mojo at .5ohms and a hc2000 of kinetik or a nsb75 by northstar i will test any way thanks for the advice.

I was designing a SPL box for 2 10's but i was seeing in other box's a triangle down in the port here is a image of my design. is this correcto or do not is very efective in spl designs? is for 2 10" it have 2.33ft3 with the woofer, port & 45's displacement, the triangle is not contemplated in the displacement. i hope you can help me