Nikuk

might be taking time off of car audio personally... I still have to glass, fab, and install for two other people. ....found a way to run 12's on the stang for <$1000.

in a sense, yeah.... same voltage, double the amperage (reserve capacity) IIRC... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee <{POST_SNAPBACK}> You would have to be careful of the heat that it would create correct? <{POST_SNAPBACK}> :?: I havent had any superheating problems or anything in the multi-batt installs that I've run before.. <{POST_SNAPBACK}> I was asking I thought if you add restriction to volts, amps, and or current it would cause heat. With adding the diode, I would think that it would heat up with it traping the extra. Like I stated I am asking. Help me learn too. <{POST_SNAPBACK}> Oh... I cant read. LoL - I thought You were talking about a straight parrellel setup, sorry. Yes, You are right... You have to run a diode or resistor that's rated for (or series of them to achieve total rating) the amperage & voltage.

155 legal is no joke. Particularly trunked. You'll need alot more power in the end. But get on TP and look up Jason - trunk guy. Loudest trunk in street last year out of a 4dr Cirrus.. 151.x iirc.

:post: I havent read and dont have time to now...

then again.... he is adding wires, amps, and at least one woofer

Cobra's don't ever need rear seats FOO... Rear Psgrs = more weight = worse performance :duh: LoL

in a sense, yeah.... same voltage, double the amperage (reserve capacity) IIRC... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee <{POST_SNAPBACK}> You would have to be careful of the heat that it would create correct? <{POST_SNAPBACK}> :?: I havent had any superheating problems or anything in the multi-batt installs that I've run before..

where's your pic Mr. Nick? <{POST_SNAPBACK}> Steve's too, iirc.

LMAO

::shakeshead:: Bigger boxes generally equal higher impedance. So I've read. In my toying around, by adding internal ballast (to bring box size down) imp tends to drop a little bit. Also, adding reflection boards right under the woofer has seemed to help me in score & impedance lately. The DD and the SX's would drop imp a little. The stroker, atomics, and old shocker sigs would make no differnce in imp or go up. Keep in mind, these were all different boxes too.

What ryan said. Wire them series'd for burps, independant of the car's system. then charge with an external charger. OR You could rewire them to parrellel to charge off alt. For daily? Parrellel them female dogs to 12vdc. 24vdc NOT worht it.

LMAO, NO chit! Actually, the one basket came of nice and easy. the screwgun spun them right out. The other, had some resin based glue dripped over each screw head... three of them sumfemale doges stripped. Picking up a reverse thread drill bit today. Your question...? On overall Q? Honestly, i can make a couple of guesses... But I've been slacking on my gaussation studies. I imagine that with a sealed backplate the flux is much more dense on the "backstroke" and therefore acting as a soft limiter on the moving assembly. But I dont have FEA or any other fun software to model it. With these quad stiff spiders and that kind of bl/re, i imagine a vented pole would drop the Q from where it's at now. [/hypothisizing] <shrug>

ONE PEAK, doesnt matter, depending on how You look at it. But on the other hand.. a few weeks ago Kent was worried about running a Mojo amp that is stable to 2ohms, because his Woofer is wired to 0.5 ohm nominal. Now, take a look at the graph he came up with and You tell me if the mojo woulda been alright

Oh You mean how ssf's are unecessary in most installs because of it? and HU settings can be set around it, and amp choices made, and fusing choices made, electrical system choices, yadda, yaada, yaaaada.

woohoo Ryan. Jack, nice friends. Supa, goes out today. Get You price later. Tom, goes out today.

this thread scares me....

Basketball size. Dunno where it came from exactly... but it's been in the house for a few months. LoL. PM me Your addy again. Why not? 15" Recones will be here in a week or so, and I have no 12" designs built that I want to use.

GOod job guys. They are both ready sans cone. The one with the basket has three stripped screws.... Time to buy an extractor kit finally. And, a large tennis ball:

YGM

that is weak!!! and it got me a 144.4 outlaw...fo go figure.. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee <{POST_SNAPBACK}> for the ump-teenth time... that's not a bad score for Your setup. And now especially, You can see why. If You could triple power ACTUAL You'd be looking at a theoretical 148.4ish. Get my point? LoL

very nice Steve. Nice pucking tools too...

Shoot me Your list... I'll plug it into excel and figure out a way to host it.

70 vac, 10.1 amps = 707.0 watts or 6.931 ohm *edit* Told yah the Mojo woulda been fine

Whats this?