Nikuk

when looking at the last pic there (of the freq response) You have to realize that the TLab's (both .net & .usb) take an logorythmic avg. of the top 3 or 5 frequencies... so I'd guess 175.5. Is that supposed to be Chris Norris? nor*ass?

isn't that an old hockey picture?

three things: 1.)Ant is VERY helpful and will tell You honestly which type of product You should go with for a particular need. I spokle with him at length (some months ago now) before ordering 5ga. of spectrum & alot of vinyl mat. 2.)I've used rammatt very sparingly and have less time "listening" to it. I was impressed, however I was more impressed with SS mat. Keep in mind that I've had more listening exposure that taints this observation. 3.)Brad, lemme know how much deadaner You need. I still have most of my SS stockpile (mat & liquid) & even a small roll of EDead left. Let me know if I can help, You know I'm cheap at best. -Nick

and get a new TL.

I think that Kent still has one. I dunno, I'll do a formal invite / begging later on. I gotta finish the format first.

I have to pee

0.35 ft 0.5 ft 0.75 ft 1.0 ft All net. I'll be using the same 3" port(s) in each. All on the exterior of the box. 35, 40, 45hz tunings.

on another note: should I make up 4 boxes? or one variable vB box?

hmm. who all has an Rl-i 8... I wonder if I could borrow it for some testing. nothing big. Not spl testing.

I'm next.

chit... so one of my good buddies here is resigning. that sucks.

Yah, this is seperate from our "annual review" raises (which generally range between 1-5% of base salaray for the beginning of the year). Ideally I can pick up another 4% then... it aint much, but it counts. Makes me a little less diligent in looking for a different job

Actually, there is bendable plywood available. Also, I have bent plywood numerous times around frames of odd shapes. It gets tougher with thicknesses, but 3/16" and 1/4" can easily be done. Soak it in water for about a day, then bend and staple, nail, screw around the frame and let it dry. Then you can remove the frame and it should warp from drying to the desired shape. But like you said, time consuming. <{POST_SNAPBACK}> that's the way to go... Overall, I would rather have as straight & short of a port as possible. -Nick

sorry, used to different scales.. 1.11 / hour or 2308 / year.

I gotta $2308.80 pay increase. cost of living ($0.28) & Equitable emploee ($0.83). Yip-mothercrunkin-eee!

[lunch]

sorry steve... Welcome Jack... That's what I'm there for.

alright Justin, i'm off to check out the link.

I agree scott.. .eh entertainment when all else fails.

:phew: I'm current

Yes Please!! Who do I have to flame? Oh PLEEEEEEEEEAAAAASSSSSSSSSSEEEEEEEE!!!!!!!!!! I'll make some more funny threads... LoL

Is it that time again?? already??