FiAudioSubwoofersjj

no

the burp only happens when i unplug my mp3 player(phone)

will the burping/popping noise damage the sub

does it damage the sub?

are the burping/poping noise bad for the sub?

what do you mean by how does it sound wireless

the sound of humming and also pops sounding like someone burping came back again after a while i dont know what is happening

so i just unhook the wires then connected them again and the system has not popped or hummed

i dont know whats going on im afraid to use it again cause i am afriad i might blow it

yeah so the at 1st the pop only happened when i plugged in the my iphone but after turning up the volume more another pop will happen followed up by a loud humming

yes

whenever i plug in or out my mp3 player into the stereo my Fi Car Audio SSD 12 makes a pop sound .. so when i was playing my music i gradually made the volume louder then all of a sudden the sub will pop and start this loud humming noise.. i dont think i blew it because i played it again and it sounded fine until the pop and humming sound came again

thanks... i live in a court and most of my neighbors are my relatives and close friends thanks for giving me tips

Bicycle... Cool I took my old 6.5 PA Speakers that I used to use at my DJ gigs... Actually the sub sound pretty good while on a bike tried it with one 8 and still sound loud and clear I just need box dimensions for 2 8's dual ported box but like the picture I'm my other post Thanks

Im going to build a system for my bike and i dont know what box dimensions i need i will be using 2 8's and 2 6x9's and a small 400 rms amp the box i was thinking of was with the 2 8's each one on each side and the 6x9's on top of the box ... something like this but with 6x9's

All Of Fi Car Audio Subwoofers !!!!

Then what is a true t-line sub box

No this going to a wrx wagon

I am going to build an enclosure soon and I don't know what box I should use Which box will get loud and clean a t line or ported , my sub is an Fi Audio SSD 12 any one have plans for either my trunk is 33x21x15 I like the quarter wave t line design but I'll do what you guys think is better Thanks -JJ

Are there any 3D designing software to design a custom subwoofers box? thanks -JJ

thanks nadcicle, so i followed the steps yesterday but left my other settings the same as before like lpf, subsonic, bass boost, etcetera ... the gain i turned all the way down then i switch the input sensitivity to 2v-8v correctly set the gain and when i turned the volume knob about 20% on the headunit the sub got really loud. thanks guys, -JJ

heres how my amp looks like... can you guys help me set my amp levels correctly? i dont know anything about the switches like input sensitivity and phase Thanks, -JJ

Any other suggestions i should try ? did i set my amp levels right ? thanks, -JJ

http://www.crutchfield.com/p_130X360BT/Pioneer-MVH-X360BT.html just checked it this is the correct one

if i had a box tuned around 40 hz how do i make it play notes lower like 20-40hz ...recommended enclosure ?