toy2008

Just got battery this morning. Charged battery at 14.1 volts at 10 amps before in stalling. Installed battery when to gym everything was good. Let gym still fine. Just when to grab some food started just clicked and nothing not even the dome light. Got DDM out resting voltage is 12.7 but it don't do anything. Put flood battery back started right up on 12.1 voltage. Lasted a whole 8 hours

I have a bigger problem now my xs battery only lasted 6 hours today now it done.

No way I had one it was loud but hated the sound of it.

I just did big 3 last night all 0 awg. And waiting for my xs d2400 from fedx today. I have though about dual 1 wired to .5. The big 3 does not give you more volts right? Because I'm still at 14.2

I spend a lot of time modelling different subs in different size boxes. But many people say that it does not apply on real world. I use WinISD

Ok so what is the correct way.

With only a skar 1500.1

3.4@ 33 then I cut port back so now at 3.8 @ 38 but its louded but don't sound that good. Want to try 5.0 at 30 or 28 hertz.

I have DDM and I want to try setting the gain will it. 1500 watts x ohm load. 1.3 equals 1950. Root of 1950 is 44.15 volt at speaker outputs @ a 0 db at 50 hertz. I'm I correct

10-4 now I want to wait will just play with the havoc 15 for a while longer.

So after the back order new models of the dcons's will be released

After modeling the dcons in same box I don't think they will have the low end I want. The xcon modeled the best.

Can't figure out how to change time on here to Pacific time.

Thanks everyone

Thinking about xcon 18 @ 7.5 cube tuned to 28. Will rasie budget

10-4 thanks

I have one. Those your have a o scope on it.

We charge 20 bucks on craigslist and got our money back and more.

Its useful for me and friend 5 guys for 120 bucks I'm game. 25 bucks really.

Track 5 on there cd is 40 hz constant at -10 db. Track 3 40@ -5 db. And track 7 is -15db. 3 for sq 5 middle 7 spl

Buget would be about 500 for subs and enclosure.

I think the dd-1 is a good tool for setting gains. Me and my friends yet to lose a sub. Knock on wood

Dcon are back ordered right. Wish I could run three. I would like to just step back a bit on my stock eletric. Then just make it back up with cone area and sensitivity.

Good tool or no. Not sure

I used dd-1 on track 5 to set gains 0 gauge run to amp. Let me know if I'm wrong I want learn. That's why I wanted to try dcons because of there sensitivity. Get loud on less power