streetbeater07

maybe you misunderstood me, what I meant by abusing was that I did play the subs pretty hard but they are performance subs and are made to be driven...thats why I purchased them. If I wanted little bass I would have bought something for that purpose. When I designed the system my goals were a daily groundpounder and weekend warrior package all in one....maybe I ordered the wrong subs.

thanks man you guys are being seriously helpful here.....excellent customer service!

Ok so I have to pay for recones and the subs are still under warranty? Nick I shot you an email yesterday with all the details of my purchases...Approx. 1 month old

tis teh reason why i need recones..........

Hey nick, just sent you an email about the recones, thanks.

yes ive emailed them directly. i was hoping that nick could at least point me in the right direction to get them but he hasnt responded since yesterday when he asked for my zip.

the enclosure is for two subs, and the amplifier has no subsonic filter.

what do i need to do to get recones?

up front: pioneer deh p7800mp amp: mmats dhcx 2200.1 two optima yellow tops 1/0 wiring big three upgrade 8.18 cuft tuned to 27hz

Ok i have two d1 q 15 w/bp power and when I first recieved the subs, they hit extremely hard but after a couple of weeks and a local comp, the subs just dont perform like they used to. when they hit the lows now the bass kind of fades away and sounds like a fart and they dont even put out the pressure like they used to either. I've checked the box first to make sure there were no leaks and everything is fine. I think the spiders have gotten weak cause they just dont "thunder" anymore. Time for recones right?

Also, i dont know how to do a recone. is it hard? i've never dealt with subs like these before only mainstream equipment that had to be sent in to the manufacturer. could you send me a how to email? thanks

zip is 36036......Grady, Alabama

they've been abused, I ran them at a local comp last weekend and pushed them pretty hard. zxip code is 36036.

bump///// cna anyone point me in the right direction to get recones?

I have two q 15 d1's with bp power and I need recones for both of them. I have only had them approx. 1 month

What about the db drive 1000.1? Kicker kx1200.1 off of ebay used.......they usually go for around that price. crossfire vr1000d rf t10001 Stick with the quality stuff man.......im tellin you, in the end it'll pay off for the lil extra you may spend

I've already opened the amp up and didnt see anything wrong. I touched all the internals with my finger and gave them a light wiggle to make sure nothing was loose. all seemed to be tight. I just dont understand it. i checked all the speakers with the dmm and the final load measured between 2.1-2.4 ohms?

this is the dhcx 2200.1 it is 1 ohm stable

sounds legitimate, but at which stage in the circuitry could this be happening?

i have checked all wiring several times and there were no stray wires touching anywhere. it did it again this morning when i got off work at 6:00am. i didnt unhook it this time i just turned the radio off. But when i woke up this afternoon and turned the radio on it played fine. i only have this problem when it gets cool outside but when it warms back up it plays fine?

bump-o-nomics 101

They are single 8 ohm woofers x 4 all paralleled then ran to the amp. Unless one of the speakers is shorting internally? possibly? I think they are rated @ 150 rms each 300 max and the amp puts out 1400 @ 13.8 volts @ 2 ohm. I hope its not a problem with my amp. bump?!?!

They are single 8 ohm woofers x 4 all paralleled then ran to the amp. Unless one of the speakers is shorting internally? possibly? I think they are rated @ 150 rms each 300 max and the amp puts out 1400 @ 13.8 volts @ 2 ohm. I hope its not a problem with my amp.

Ok, I have a MMATS DHCx 2200.1 hooked up to 4 single voicecoil kicker comp c12's 8 ohm each for a final load of 2 ohms. The amp is a mono channel. The problem is, sometimes when I get in the car and turn the radio on the amplifier goes strait into protect. You can still hear it playing at a very low wolume ie. 2 or 3 bars on the radio but if you turn it up any louder the sound fades away and sometimes I can turn it on and it plays fine. It usually doesn't do it unless the car has been sitting for a while. When it does this, the only way I've found to get it back playing correctly is to unhook the load from the amp turn the power off and turn it back on and reconnect the load back to the amplifier. It never does it while its playing though. Sorry for the lengthy post just trying to explain the problem so maybe someone can help. what could be the problem? thanks

how long is the current wait time on the q 15's? I ordered two last wed. and I checked the ups website and still no shipment. just wandering how much longer it will be. thanks