antoinez28

I already said wat happen in another tread So to day I was running another wire for my volt meter and when I was tightin down the wire to the remote input the ally key slipped out an tap the + and - terminals I have dual 1/0 inputs for less than a second... Is it fix able or do I have to take a loss and buy another one... It will not cut on fuses are good

Ok thanks

Do I send it to ssa or crescendo

At the time when I bought the cca 1/0 I was Penney pitching and now that I can I steal want maybe when I upgrade my subs I will

Just a few pics Should be getting this sometime next week Got the crescendo logic f-31 up front with the home made terminals Order another roll of skyhigh 1/0 cca to start cleaning things up

Just a few pics Should be getting this sometime next week Got the crescendo logic f-31 up front with the home made terminals Order another roll of skyhigh 1/0 cca to start cleaning things up

So I went to homedepo for some wood and started to build the box that Alton designed for me Just need to put the top cuts the holes.....than buy a router and apply a couple coats of Bedliner

Another bc2000 thanks to jasonc13

Where did you order that at

A I want that audiocontrol hold that till tomorrow

So I went to Sound Deadener Showdown to start ordering deadener and was wondering how much of what should I order...from the site it seems like I just need to order for my doors headliner and other items that are not attach to the floor...my ? Is how much should I order don't want to order to much or to less money kind of tight right now Thanks alot

Here some pics of my tahoe and the subs... The box is a rush job for when I had 1st got the subs in my hand ( but today I went to a Midwestspl comp by H&H audio in Olathe Kansas did not place just wanted to get metered so I can have a starting point and the results 144.5 thank you steve from Midwestspl) I'm still working on the sub box that Alton designed and thanks to jasonc13 I will have another bc2000 going in the tahoe still undecided my highs and mids....till next week batts 3 die hard platinum group 31

I hope you have the processing power to use said speakers... We'll wat do you think I should run with...any suggestions

I hope you have the processing power to use said speakers... We'll wat do you think I should run with...any suggestions

Idk I like crescendo products and want to have there stuff....they may suck in customer service but I guess looking how other do it I'm going with 4-8" pwx 6-6.5 pwx and 2 ft1 for now...can't wait

This is my 1st build on a forum I will be going to get my car meter before I start the build. And was wondering should 6 pwx 6.5, 2 pwx 8"and 4FT1 go together or the crescendo cz 5.25 2 sets and 4 pwx 6.5 once I make the choice than I will start the build.

So wat do you think about gtmat any good or wat

Thanks for the reply everyone will have a build log soon or later on when I get everything in order but thanks

Should I buy the bc5500 and run my hcca 15.2 at 0.5ohm or just keep my current bc2000 and buy and another bc2000 than run my hcca 15.2 at 1ohm

Any db drags in kansas city mo

So i want to build a l ported box with 48l x 28w x 20h. How big do i have to make the port so it could be around 30hz

We'll can somebody help me with a cut sheet for a sub box with me goals and set up

2005 tahoe Area to work with 48Lx 32w x 22h Head unit is a clarion vz401 Audiocontrol 3.2 eq 2 orion hccA 15.2 the black ones 2 crescendo audio bc2000 one I have and one on order 2 crescendo logic bat one I have one on order 2 runs of 0 guage - and + Stock alt Copper bus bar I play a lot of hip hop and r&b looking to tune around 30hz-35z

Ok just want to be lead in the right path so wat fo you need to know so I can plan/built the right box for my set up

This was taken off SMD the person has 2 orion hcca 15.2, I have 1 crescendo bc 2000, but going to be running 2 when it gets here at 1 ohm per sub the port area is around 124 cubic in and it's tune to or around 33 hz. And the box will fit my tahoe perfect if I built it like that