1samples

I see what your saying. But I did clamp this amp at 15.5 volts at 1ohm and it put out 2500+ Watts I haven't tried it at 2 ohms with 15.5 volts but I did at 14. And it didn't get over 1150watts.. But all I'm trying to do is figure out how to link these two together

I'm running a 14 volt system with three xs battery's my alternators are turned up to charge at 15.5 so electrical is not a problem.. I clamped my new 20.1 by itself and it puts over 2500+watts so if I run these amp independently at two ohms on each subs I will only get about 1000w on each sub

I have two dual 4 ohm subs so unless I can get these amps strapped together I can pretty much get more power out of one then running them both independently

So I guess it can't be done

I got a new incriminator 20.1 a month ago and just got a used one two days ago they look the same but the link cables are differnt on the new one it looks line a phone jack and the used one is RCA my question is how would I go about linking the two together