rushnrun

<a href="http://photobucket.com" target="_blank"><img src="http://i63.photobucket.com/albums/h153/rushnrun/Tahoe%20Build/251764_10150207977598513_505228512_7057428_2295161_n.jpg" border="0" alt="Photobucket"></a>

OK... I really need to figure out this picture posting thing... why can't I get it to work

http://i63.photobucket.com/albums/h153/rushnrun/Tahoe%20Build/251764_10150207977598513_505228512_7057428_2295161_n.jpg http://i63.photobucket.com/albums/h153/rushnrun/Tahoe%20Build/251539_10150207988793513_505228512_7057624_222487_n.jpg couple of pics

I'll get a full Build log posted.. I need to get with Eric (the owner of the truck) and get the photos he has.. I've got very few.. the build isn't finished yet.. the vid was taken at the show in michigan.. we got it powered up at 2am that morning.. lol

We'll be back around.. i've never seen a vehicle do that before.. had to be something about the building... I normally have trouble with music at half ohm but never my runs.. it was burping a 55.9 in the parking lot and wouldn't even play inside... The amps are out of the jeep now... **they're decent amps.. they just don't like .5ohm.. we're dropping them in the tahoe to do some testing.. *** we did some lower freq testing... Tahoe still plays solid at 15hz.. I need to get a disc that goes even lower..

welll.. still don't know how to post a vid correctly

12 A12.22's on just 1170 clamped watts, playing 21hz 12 Rival Mobile Electronics 12's, 4 Massive P1500 Amps, 6 Shuriken Batteries, Unfinished wall 150+db at 20hz sealed on the dash

Hope to see some People out there... Just finished up the Tahoe at 2am, didn't get a chance to work on the jeep.. but it's good to go. I'll be the one surrounded by all the Rival Guys.. Find me in the Green Jeep.. **leaving for the 5hr drive now..

who comes out of IN? which team? the Ohio guys are the loud ones.. I don't know of any IN competitors we'll be bringing some big numbers in m3-m5 **just painted the tahoes box... putting the subs in tomorrow and getting it wired up... (it's just the empty box at this point.. no wires no batts.. nothing.. we'll be at it all day tomorrow.)

I'll be there with part of my crew My Jeep, M4 or M5 S10 blow-through in M3 and Hopefully the Tahoe I've been working on will be done for the show m4 m5

some pics... gotta upload the rest..

well the box rebuild wasn't for the best.. only did 153.5@51hz... tuned box back down even lower then before.. 27hz---155.9@36hz... need to do some port tuning now.. needs to be higher now, but it's fun to demo this way.

Truck is gutted (well the main framing of the wall is still in)... I'll get some pics of the rebuild.. It'll be rebuilt today.. gonna put in a solid 10 hours and get it done.. I'm reducing box size and raising tuning.. due to popular demand--sticking with the 4 woofers for now.. see if I can do a low 60 with the 4..

I'm not saying it's right.. this is a temp setup.. however I've never had any issues with it.. I ran 10 batts in my ram for 2 years on the stock alt and never had an issue..

I'd like to. but I need to do mid 60's to be competitive.. I know I can get the 4 right at a 60-61 but much more will be tough (not to mention the 8 will be easier on the amps due to a higher ohm load----I'm dailying them at .5ohm right now)

** I should note that it does take forever to recharge if I demo for an extended period..

Its a Junk truck... I threw this together in 3 days (whole wall) I have no intent in keeping it around, just built it to take to SBN and a few local shows until my ram is fixed. **I've never used H/O alts... and I've never had any issues... My voltage sits at 13.2volts **Some day Ill plan on keeping a vehicle and do it right.. for now this works

Haha.. I know... he was just sticking his head in for a listen and it just happened.. lol We'll get more ladies in there as the year progresses ***Next week the four subs are coming out and 8 are going in ;P tring to do mid 60's when it's all done... If the wall was actually finished and sealed I think it could do a 60 now..

Thanks for getting it to work sefugi!! now how is it done? ***I'll have to get some vid's with the woofers in it... didn't realize I don't really have any of them playing.. I'll dig up some pics ***High spl so far is 158.8db Meca Style (mic at head rest--39hz)

Just a few vids of my Jeep, Running 4 Rival A12.22's and 2 Massive D16000 amps (total clamped power is only 8000w) 6 Shuriken SK-BT120 Batts, stock alt, unfinished wall www.youtube.com/lnmQyw7qGpA www.youtube.com/gCU00C4XhFY www.youtube.com/M2HbzbpyLKI well I don't know how to get the videos to post properly..

The subs are in production. i have more then plenty on hand. I just don't have the website up and running yet..

Dictator-I just want the rise to be a little lower (I'd like to see it rising to MAYBE 1.8 from 1 that way when I wire down to .5 for burps I'll be sitting just below the 1ohm load needed to get these amps to really work well).. meaning I need the tuning to be a little closer to the peak freq. the box size will drop some which will aid in the lower rise as well **I guess I failed to mention... this box isn't even glued together.. just screwed--I knew I'd be making changes.. no bracing anywhere (just a big open box with a port slid in... the 1.5" thick does help keep it from flexing though.. truck's getting four of the massive d8000 amps over the winter... and 10 Shuriken BT120 batts.. hopefully seeing 16k on a burp--and closer to a 156-157.... I'll keep working at this till I find a 60 or break the truck trying **hopefully the box re-do will net a nice little gain before the additional power...

thanks Julian! now how do you get it to work? duran--the port isn't all that big... just 157.5" of area... the re-do I'm gonna stretch it out to 200in^2 It's pretty violent right now... I need to get some better vids after the rebuild and more power