shonB

okay thanks... i found it this morning...

u got ne contact info on him?

i see... i may send this in after i do a couple more tests... i dont think its right... i will get it some more power first before i say for sure

well... shit... i report for duty at 9am

i agree with you guys... ill have a sq3500asap... thanks for the advice

i agree with you guys... ill have a sq3500asap... thanks for the advice

u never had this one hooked up nadcicle?

Yeah, thats the owner. I posted this same post on SMD a day or 2 ago under the CT Sounds forum where he frequents and haven't had a single reply?????

i know thats the truth... typical with most companies but i thought ct was legit... its okay but not what i want

yeah... website says [email protected]

yeah stephen... i made a mistake i know... should have never left my soundqubed line...

probably right... supposed to do 4000 @ 12.4 and i think 4800 or so at 14+...

okay, just had a chance to clamp my ct sounds 4000.1. Not impressed and wondering if anyone has any suggestions on what i could be doing wrong. Had a SQ 2200 and it is considerably louder than it but still i would like to see the amp do rated... 54v x 48.2 amps at .5 nominal... rise to 1.12... 2603 watts - 50 hertz - drop to 11.8 on dmm at dual inputs, not gain knob... at 12.4 volts that would still be less than 3000 if my math is correct... that was using the clip light to set gain tho and i have heard they are early... didnt have time to check oscope against it... 2004 blazer, 240 mechman, duracell agm 34 under hood, 400 amp fuse, duracell agm 31 in rear, Kicker 1/0 BIG 3, SHCA 2/0 to the back battery, SHCA 1/0 x 2 to the amp, hdc3 15s d2... IDEAS OR THOUGHTS ANYONE? any info will be appreciated!

i cant answer on the electrical... that alt seems small but you already know that... i have 2 hdc3 15 d2s on a ct sounds 4000. @ half ohm... they beat the hell out of the blazer... they will want all that power u have... 1500 rms is highly underrated... i have seen people stack the amps... i had both of those subs on a single 2200 @ half ohm and it never got hot so that shouldnt be an issue... badass amps! i dont think the extra length of your wires will hurt anything as long as they are sufficiently sized... good luck with your install man!

welcome to the forum!!!!

welcome to the forum... from what you said we have several things in common...3 months ago i had 2 kenwood 10's...like you said, thats not enough... its never enough... now i have 3 15's and 9000 watts, and contemplating more... its a clean, healthy addiction and there are quite a few knowledgable people on here that will help you on your journey... good luck man!!!

good point... i rose to 1.4 from .5 at 40 hertz... any time you go lower than rated nominal you are taking a chance

I have had mine running at .5 for awhile now with no issues. It was rough on my stock electrical the first week before i got the 240 mechman and 2 agm's.... very powerful amp.... more than my hdc3 15's want... it doesn't get hot either....

shonB, Thanks for updating this! We go over all product that comes back with a fine tooth comb. We aren't here ring you for every dime you have. We have built a very strong relationship with our customers and pride ourselves on our customer service, tech, and service department. I will talk to our developers about this and have it fixed promptly. I have dealt with you on another issue that was caused by user error and you proved that you arent just in it to make money. Any reservations I had about Soundqubed have been resolved. The product is quality and the price is right. I will finish out my system with SQ and recommend them to anyone that asks... and i've had quite a few already!!! Thanks guys!!!

low power / bigger enclosure, high power / smaller enclosure and you my friend will have a decent amount of power on tap for that copper 15.. obviously the bigger box is more efficient, but which setup would be the loudest or get more spl?I wouldn't really say that. . . . And really noone will be able to tell you what will be the "best" . And people who have said certain things will be the "best" for you. You probably shouldn't listen to them......... there is just so many things that can make differences. ................. and do you really mean you want your system aimed toward spl or are you wanting to be "LOUD" because there is a pretty big difference to being loud to the ear and loud on the meter. . . i get what you are saying.... its daily so i mean loud to the ear....

low power / bigger enclosure, chigh power / smaller enclosure and you my friend will have a decent amount of power on tap for that copper 15.. obviously the bigger box is more efficient, but which setup would be the loudest or get more spl?..try 3.75 low power / bigger enclosure, high power / smaller enclosure and you my friend will have a decent amount of power on tap for that copper 15.. obviously the bigger box is more efficient, but which setup would be the loudest or get more spl?..try 3.75 tuned 36-38hz thats kinda what i did.... added another sub and built a box that ended up being 6.9 net @ 38... very happy with it!!!!

low power / bigger enclosure, high power / smaller enclosure and you my friend will have a decent amount of power on tap for that copper 15.. obviously the bigger box is more efficient, but which setup would be the loudest or get more spl?

ive heard the amps will run .5 daily...

okay... thanks.... saved a 100$... could always add them later...

id be happy with that considering the price...