Sencheezy

congrats penguin, hope everything works out! I know how difficult job hunting can be and time consuming

Plus 20 bucks

I'm running 1200 to mine in a 6cu box So I think you will be ok. But will be running 2500 soon. A few other members are running 5k (smartly) 3-4 weeks would be good estimate

It wont be a wall it will just be a trunk setup in my Yukon. All sides will be double baffled The side walls is what I was refrencing to. If this is the case, Yes, birch would be my wood of choice. So your saying since I'm double baffeling Birch would be more louder than double baffleing with MDF? First off, what is the setup? You may be over thinking/killing this whole process. If doubling all layers, yes, I would chose birch over mdf. Why, because double birch vs double mdf in sound difference would be un audible, so why not save the weight.

It wont be a wall it will just be a trunk setup in my Yukon. All sides will be double baffled The side walls is what I was refrencing to. If this is the case, Yes, birch would be my wood of choice.

I don't believe theres a *best* in anything really, everything has pros and cons. I believe that birch isn't as dense as MDF, which would be one of Birch's cons. How many layers will you be adding? (walls)

Agreed

That 350 can go a long way. Hell thats almost how much I payed for an zcon. You should shop here on the SSA store for products would be my suggestion.

Not that RF is a bad choice, but just curious in reasoning. Will you be buying retail?

Looks good brad!

to answer your question, yes, you can mount an amplifier upside down, it won't get a head rush But would I mount it to the roof? No. Sounds like you have a plan, but still wouldn't be my choice. Do you have a false floor? If so, is there any space below that? How about at a 45 degree angle from top of enclosure to the back side window? Is there any space at the bottom of the enclosure against the rear seat? Any room under the rear seats? Pictures with box in from different angles would be amazing right about now

Did you do that drop in test yet sir?

Will be there!!! Asking "Where's the beaches"

You are special to meeeee (singing voice) I know who NOT to tell secrets to next time! Next time I will not spill the beans. But at least tell me when I gots secrets!!!! lol I was j/k We're not going to say any names or anything EDOUBLE Well that was very early impression that I haven't tooken the proper time to tune anything really. Hopefully with some more playing around and tweaking everything will get better. Yes I have updates thanks for the interest! Yesterday was the first time doing any tweaking, 3rd shift/school/ really kicks my ass some times. Plus nothing special really has happend. So yesterday I pluged in my 45hz tuned port and raised my SSF accordingly and I recieved much better results, as well raised the sub volume on XEQ. So this leads me to believe a few things. One being, if Shizzzon theory of larger enclosure influence the driver to idle lower notes, than a higher tune may bring some balance. Also, before, I was able to turn the sub volume up much before because it would bottom out, I must have not set the SSF correctly. I have a MECA event tomorrow to attend to, so with the shorter length of tune, I will bring enclosure closer towards the gate, which I'm hoping will yield even better results. During early testing with the 45hz tune and changed SSF, the excursion of the Zcon on lower notes was amazing on the lower notes, I was suprised really, with no signs of stress. So after the even, I may decide to tune to 37hz which will bring the enclsoure closer to the tailgate. Currently, since tunning to 34hz requires so much length, the actually subwoofer is a pretty good distance away from the tailgate, I have a feeling that that too may be why I am loosing some pressure, because when I go back there right now, MAN, its like 155dbz back there, causing blurry vision and all. Thanks for the support rabbit To answer your questioni, yes, when going to the Zcon I built a brand new enclosure. Another reason why I haven't done much changing, is because I really need a meter. I myself enjoy data. Listening by ear is just too much of an guess for me to say which setup is louder than the other as I'm assuming the MAXimum difference will be 4dbs has me and Shizzzon have discovered in earlier testing. The closest meter to my knowledge is 3 hours away in KY where shizzons lives. Theres a DB meter app for the droid, but not sure how accurate it is, but I may still use it as refference. Oh I understand sean and I believe you may be right. If I hear an increase in volume by swithching to a smaller enclosure, I will add volume to the current one that I've build.

This question has been asked a 103845937 times. If you would like, you can search key words of your question into the search bar and can see many results that I believe could be of some assistance.

welcome! nice jeep Wheel/Tire combo?

ironicaly, you're upset not being able to play netflix via xbox, where as i am happy to have xbl and netflix as a bonus.

a year! damn that sux

looks damn good steve! Your cutouts looks like mine

that box looks amazing!

16gb ipod 1$/song Whats math?

I paired my Icon with an aq1200 and it had lotsss of output

I think that pic of two 3ks was photoshoped