Sencheezy

nice job look good

an F.i N3, 40ah lithium, and Tarmps 8k, inside a birch box. Ultra sleeper system.

yeah, that would be awesome. This battery only weighs about 70 pounds or so.

Here is one test of many that were performed prior to leaving for SBN15'. This test will better give you an idea of what to expect on music.

should make some noise

IAK

hell yeah man!

They will be angled

some pictures from over the weekend.

I tapped out as well, lasted for about 10 seconds.

it was actually doing 166s on the SSA meter.

Just so everyone knows what's exactly going on. Mike Smiley, back me up if I missed something. I have 1 DC Power 240xp, 1 80ah Juice Box LiFePo4 battery. 2 runs of 3/0 pos front to back, and 3 runs of 3/0. I have 2 Taramps T30k amplifiers wired at .93 ohms. My box rise is right at 6 ohms. Average voltage drop was 11.7, as seen in video, average current draw was 1600 amps, as seen in video. We performed 6-9 runs back to back of 30-50 seconds full tilt sessions. It took roughly 13 seconds for each run to bring back up to 13.3 volts. We are clamping over 20k rising to 6 ohms on music. Throughout the videos, avg SPL on dash was 159.x door open. No smells from subs, amps, or batteries. No signs of failure anywhere during testing.

Please do Sencheezy a favor! Like, thumbs up, comment, share, and tag your friends! Taramps T30k Unboxing: 60,000 Watt Car Audio System - TEAM SSA SUBWOOFERS: https://youtu.be/fCXQqL1chSY

He's a very intelligent person. He knows how to model, hence his wordings. He's asking WHY do people in high SPL application apply this design, when by paper, it seems counterproductive.

All Subs are mounted and wired to play!

Has anyone else ever seen this before? Is it because of how much motor force is in the box to cause this? It's magnetized the box braces.

Getting there. I'll be headed down to SBN Thursday. Amps come in Thursday morning.

beach side motel

I think I know his question... lol. If power is the same If box is the same Will there be an audible gain, changing from A) Subwoofer with 1000 rms rating to B) Subwoofer with 3000 rms rating

boy, it's gonna be a close one! I'll be there, but system will be playing the night before as always!

You should have the space for 2 15s right? Here's a quick vague answer for ya. Buy two SMD 15s, build a box to spec, which would be around 10cuft NET with a shit ton of port area, around 160-200cuin of port, buy 2 Taramps HD8ks, and about 6-8 batteries. I think you would be happy.

haha Thanks!