lownlouddd

Corsair 140s installed tadaaaaaaaaaaa

the G..... hmmmmmmmmm... we will learn more about this spot later on(;

the key to getting this result is do all filler work,sanding the wood to 320, primer, wet sand with 600, then roll on with a foam roller or spray on 3:1 ratio enamel thinned with laquer thinner so it lays real nice. i rolled it on and still had a mirror finish RGB LEDs added around the subs

filler fah days yuck... gotta get rid of all ****

Goal of this build is to look good, but most importantly sound good. pics do the talking testing port fitment snuggieeeeeeeeee

2x4 inside the sealed section, like a frame, the 3/4 is screwed to it

mas primer uh oh, got a hole in muh box this should be sick once illuminated more coming tomorrow. or well, today

updates ready to pull a all nighter primered up to see what still needs attention plexiglass there? eh, fuck it why not

1/4x20 bolts through the pod and door panel, nut and washer on the back

lil distance test on the doors

start of the baffle ohhh its close.. like always aye aye aye test fitting probably gonna get a 480 soon but atleast for now, my battery for the build, yes, battery, as in singular already startin to sag some plexi would look right at home on these side panels hmmm 3/4 all thread in there dem doors doors installed, gonna wrap them in vinyl here in a few weeks some 12v metalworks accessories, ground block 3 in-3 out, 3/0. also have a 4 in 4 out 3/0 fuse holder wanna do a nice LED dome light like this I saw in Cole Morris Colorado baffle in there, got some 1/4 angle iron on the sides to bolt the baffle in build is current now. more to come soon, been slaving on other projects but im just about caught up now so should be able to get back on this ASAP

final roof piece before i put it in 48x31 lol subsssss start of my pillars, 2 PRV 450ti's per some bullshit flush rings lol this has been chillin since i had the burban, finally will be able to install it

sanded a lil round over onto the front finish piece, not lookin forward to filling the screw holes.... lil present came in the mail, chevy case Singer 320. this will be my secondary alt, hoods probably getting cut to fit it too, #nofucks also have a singer 320 for the stock location as well, should keep the TFE 8.0 happy.. some random kerf action yesssssssssssssir a amp this big and sexy calls for plexiglass and leds.. its a comin

for those who know me or any of my builds, i love plexiglass lol it gets used whenever applicable 1st solid layer in, one more to go 2nd layer in, still need to make side pieces but the base of it is in

2x4s FTW and now to start the roof, 3 layers, 2.25" thick, all kerfed to get maximum airspace for the box/ultimate false roof

mmmmmmhmmmmmmmmmmmmmm PL time to start the box goodbye rear deck, left the supports in on the sides to retain structural rigidity PL is life doubled up everywhere side walls going in kreg jig is life

helpin the homie knock out some pods for his blazer no bondo yet, all glass, i dont like using much bondo.. just fill with resin. primed and now just chasing out pin holes, very skim layers of bondo deadening the floor 2 layers of 60 mil, its gonna get wood and foam soon so that was pointless lol pods almost ready door cleaned up

trimmed up 1/4 thick

this is an extreme build, no fucks are given about competing unless they make a class that measures how windy your shit is, goals are 15-40hz with as much output as possible, car is a daily driver, lets get it goin. relocated the head unit to the old cassette player location so I can do a modified dash bezel to hold an ipad and other shit doors were up first, single Crossfire XS 10", sealed up, midbass for days glassing bolts in so i can secure the pods to the door easily and securely teaching my boy how to glass