bass_4_ever

you are correct, the MA amp is 1500wrms, in the manual it says "100amp fuse recommended" I even called to double check this. My distribution block only has 1 0 gauge input and 2 4 gauge outputs. One side goes to my 4 channel amp (which is working fine), and the other goes to the DB3000. I doubt there would be any trouble further up the line if my 4 channel is being powered fine... I used the DMM on the terminal which read 0.03v

i have 2 batteries in the trunk. The way the wire is run right now is: battery ---> fuse holder / distribution block --> (60 amp fuse) --> 4 channel amp --> (100amp fuse, what is recomended for my amp) --> DB3000.1

I have 2 Massive Audio D3000.1's right now with the gain turned up about half way. I put a recommended 100amp fuse in the holder... today i got in the car, turned on the stereo and one amp didn't turn on. I checked all the wiring, everything is fine...checked the fuse, fuse was fine. The amp doesnt turn on at all, doesnt go into protect, nothing. I used a multi meter to check the voltage, the remote wire was reading 12v but the power wire is reading 0.03v what happened?? :S

cool thanks, ill check those out. Anyone else have any other suggestions? Thanks!

i called and asked regarding a price on the Stetom amp, the 5K i believe, the guy hasn't called back I called him and he said it will take 2-3 days to get the price

we cant just give you an answer unless you tell us more of what you want...what is depth?? What are you goals? what are you wanting to do with this setup? Whats your power supply like? What amps are you going to be using? etc etc and please stop yelling

I appreciate your help nonetheless...the Sundown 4500 will still be an option to keep in mind.

so far: 260amp alternator, big 3, 2 Kinetik HC2400s

mostly daily driver but a few comps here and there

I was thinking of the Sundown 4500, but wouldnt I need a little more wattage to the Mayhem's since they're rated @ 2500wrms? I'd rather not turn an amp all the way up...

heh I had a bad run with Lanzar a little while back. Not sure if I want to run they're stuff again but im open to suggestions! I would rather buy something new instead of refurb...just my personal opinion.

Hey everybody! I've narrowed down which subs I want thanks to the help from members of the board, so thank you to those people! I will be running 2 15" AA Mayhems. Now for the amp(s), I would like to run 1 amp as opposed to 2. I was refered by one of my friends to check out the Cadence ZRS-C6...any input on this amp? A friend of mine owns a shop and they those amps run for around $1599 (Canadian). He also told me about the Earthquake PH10000D which retails for $1299 (Canadian). Any input on this amp? Also, if there are any other amps I should keep in mind around the 5000-6000wrms @ 1 ohm range, please inlighten me! Thanks, Andrew

I'm running 2 amps right now and it just seems easier if I were to run 1, simplify things a little. I was thinking of the Stetsom amps. I've never heard much about the Crossfire amps, inlighten me! lol.

the BTL would be the better choice for a daily driver...the SoloX is more a sub for burps. The BTL, from what I've heard and seen are amazing drivers and would be a lot more musical for daily use then the SoloX

fully loaded, i think that includes everything except the PChamber...if you go the the FI website, select everything, it'll take you to the next screen and it'll tell you to take off one of the options. and there ya have it!

Right now my electrical consists of a 260amp alternator, 2 HC2400s, and 1 run of 0 gauge to the back. the AA mayhem could take ~2500wrms each no? so wouldnt I be able to put more than just 3000-3500 to each?

Yeah bud, glad we could help. good luck with it and i hope to see the build in the future! Thanks its my winter project since the car is going into storage! Will be ordering the 15s very soon! Any input on amps?? I would rather run 1 amp, playing @ 1 ohm if possible to both fo these subs.

X2...well put M5

im hitting a 145.9 @ 38hz on the TL with 6 cheap 10s running around 1400-1500wrms....and its not a wall, everything is behind my backseats in an 03 golf. I'm not comparing, I'm just saying that with what you have, your definately capable of breaking the 150dbs. Like everyone else is saying: a new box is a MUST

flex! lol damn...your hatch is gonna pop off soon! great video!

great build log! lovin them rimzzz heh. keep up he good work!

cool, thanks everyone! So I think my mind is made up! Ascendant Audio it is! Maybe i'll just wait to see what the *** sub is like when it comes out since im not buying right now, gotta sell my equipment first Thanks everybody!

Phoenix Gold RSD65's FTW!

Then i dont see why you would have a problem then. Here check out some of my videos, these videos of my truck are older, it was when i had that 6cu box in, so you can watch to give you a good idea of what its like. http://www.youtube.com/user/Valhalla00Awaits thanks for showing those vids! what did you like more? The RE's or AA's? Just out of curiousity...

the size of the box i will be using is minimum 7 cuft, maximum 9cuft before displacement