JoshM20

lol, nah, I didn't think they could either, but I asked Jacob if there was a way. I should just bite the bullet and get a 3000... That way if I decide to switch out my gear to my explorer I would have it already... I was actually thinking of trying to wait and see how the 2000 turns out.

Im either gonna strap 2 1200's or get a 3000 Maybe 2 1500's strapped... Not sure yet... Someone wants to buy my amp from me lol SAE-1200's aren't strapable. Im pretty sure i read where you could with a max link. im unsure on that though but it was my plan when i get another bl and 1200d down the road. That is correct .. you Can strap them with a Max-link .... And Rob yes That is the Plan, I was just in a hurry earlier. I suppose I should have said Matched

I will either gain match or I will upgrade my amp. Like I said someone is wanting to buy it, and I have a few options open... Honestly If I ran them Strapped I would probably upgrade the subs to a BTL... more than like likely I will just upgrade the amp

Im either gonna strap 2 1200's or get a 3000 Maybe 2 1500's strapped... Not sure yet... Someone wants to buy my amp from me lol SAE-1200's aren't strapable. According to Jacob, they are.

Yea, I will just cut out the port and mount it on. Should look pretty good when I do it... Hopefully when It warms up some!

Yea that port looks pretty awful haha. When I got the pieces cut, they guy cut that piece about a lil over an 1/8th short.. So I made a cut to fit over it, I will glue it and then I am goin to put another baffle on it. So it will look set in.. Then I will hit it up with the roundover... =)

Yea Rob, did a Collab with your design and just made it a little larger... Still tuned to 34Hz though I think it came out pretty well, The inside is pretty sloppy, but I built this in 30 degree weather with 3 jackets on, so I think It came out pretty well haha!

Oh yea definitly, That's why I wanna mold a housing for them, so I can get them up on the dash somewhere nice, but not have it look like total squat.

Just got done goin for a drive with the new Sub... Man that thing is a beast!! I can't wait till i get both in it! That thing is crazy!

Im either gonna strap 2 1200's or get a 3000 Maybe 2 1500's strapped... Not sure yet... Someone wants to buy my amp from me lol

No I have 2 15" BL's... I am just waiting to get the box for 2 of them so I am gonna put only 1 in now

Hey guys, I am gonna wire up my 1 15" BL It is a D1 and I am wondering If I should wire it in series at 2 ohms or parallel to .5 ohms... It is gonna be hooked up to a Sundown 1200D... I am wiring it right now So quick advice would be much appreciated... thx

You talking about the housing where they can move around different directions?

They sounded really good when I first had them hooked up... But I was messing wit my amp and I think switched how it was crossedover or something... I'm not sure, they started picked up the lows for some reason and then on some songs they had this weird low hiss like a blown speaker sounds... So I turned all my lows down and I tryed to figure out what was going on. But it would come and go, some songs sounded fine others sounded like the tweeters were shot... I dunno really weird. I'm just scared I may have somehow messed them up? I never played them where they sounded like they were popping or anything, but I dunno it just started doing this.

point towards the rear window? why would u want to do that? It Is the same as having them in the A-Pillars.... They would be pointed at the front seats... Remember those were the Front tweets I was talking about...

Yea The table saw is all I really need, I have everything else The table is not super pitted but it is pretty bad... It was almst like a corrosive rust? It looked weird before I sanded it down.. It looked like battery corrsion in comparison...

Thank you so much! I am trying to slowly build up my tools so I can make somewhat decent box's to play around with, I don't have a table saw yet... Well I do but the top has rusted... I sprayed that rush remover on it and it's not rusty anymore but it has those pitz in it... scared the wood won't run across it smoothly. Do you think I should get another TS or do you think that will be ok?

hehe, hope that got your attention guys! I am going to start building a box for 1 15 while waiting on my sex box!! From teh BJ!! But back to the question... BJ I am going to go to freight harbor and buy a router!! Can you give me some advice on what kind you use and what jig? I know you are much more skilled and I'm sure you have some great equipment... but I have never had/used a router and could you PLEZ give me some advice on what I need? Router/Bitz/Jig... Hope this is ok to put on here concidering I think your box's are amazing and I am trying to build some like you... And you are designing me one You could PM me or just post on here and I would be super super super appreciative... Thx... Sorry for any spelling errors! Thx Josh~~~

Well I was hopin to pull the carpet out today..... BUT I doubt I will, it is freakin cold!!!! I may start building a box today I need to redo alot, I have decided to put E8's on the back deck with some tweeters and I will put lanzar 6.5's in the rear doors... I will be molding new tweeter houseings to sit on the front dash and poit toward the rear window... I still have not find which tweets I want.. But I will come to that conclusion soon I will try to get some box pics today!!

I think I am going to get the Lanzar mid driver and some tweeters off of ebay, maybe some bullet ones for the back and dome up front...

When I get some closed cell foam, do I put it evverywhere I can or more on the thinner areas? Like the floorpanels and such.

Yea that's what I was thinking, I would be able to get 120Sq ft of RM for the price of 80 Sq ft of damplifier and only like 40-50 of the damplifier pro... I could always double up the places that I think need more with the RM and I think it would be better to get alot of the car dampend rather then just the trunk or just 2 of the doors

If you are going to deaden, I would get Damplifier Pro over normal Damplifier. Yea, and if I were going to take a chit, I would rather do it in a gold toilet, not a porcelain one. But obviously it's my budget that keeps me from doin it.... Okay, well how much would you like to allocate for deadening? around 200-250

If you are going to deaden, I would get Damplifier Pro over normal Damplifier. Yea, and if I were going to take a chit, I would rather do it in a gold toilet, not a porcelain one. But obviously it's my budget that keeps me from doin it.... ahh suck my balls chat chit lolololz

so is the regular second skin damplifier, thicker than the RM? that is I AM AN IDIOT AND I CANNOT SPELL PROBABLY my biggest question