JimJ

I realize the cone wont move as much, but audible output at low frequencies is poor compared to having more port area per sub; 3 subs 200sqin vs 2 subs 180 sqin. Either way, Sealed sounds great with these, but Marks recommended sealed volume vs the 'optimal' Qtc of .707 still intrigues me? I'd be hesitant to call the typical Butterworth alignment of 0.707 "optimal". Like anything in enclosure design, it's a compromise, between being underdamped and overdamped If someone can live with less output and knows enough not to kill the speakers due to the reduced mechanical power handling, maybe they'd really like an overdamped setup with a lower Qtc value - IB is a perfect example of this.

Not all subwoofers of the same size take the same enclosure volume It's a lot easier to read when the caps lock is turned off, too...thanks.

Bat cave runs again

Time to change the battery in the van, and of course I took all the combo wrenches I had here back to NC the last time I went I think I have a small pair of vice-grips left though...

Just so we're on the same page here, what kind of music do you listen to that has really good SQ?

With Klein Horns, perhaps, anything short of that, doubtful

I got flamed pretty hard about making a comment on another forum about letting Ford & GM fail...apparently I'm "dogmatic" about "hands-off capitalism"

Bringing a Smart Car to Lowe's...what were they getting there, one houseplant?

Nope. Cross section of 1/0 is 55mm^2. Cross section of only 4/0 is 120mm^2. 6/0 is almost 2x the size of 4/0. can you show me where you get your info? Do a Google search for "AWG and mm^2" well i have a site that i get info from...... so it not that i have no clue... its that im trying to see where he gets his info......cause it seems as if the site i use is shit These kind of things are reprinted everywhere, as engineering references or whatnot.

Nope. Cross section of 1/0 is 55mm^2. Cross section of only 4/0 is 120mm^2. 6/0 is almost 2x the size of 4/0. can you show me where you get your info? Do a Google search for "AWG and mm^2"

My mind is playing tricks with me, I can't remember if I got a receipt for this thing when I paid with cash on Tuesday...typically, I find every single receipt for things I don't care about but I can't find the one that I actually want to return Oh well, they're going to take it back anyway...

Time to go battery shopping The Optima's down to 5V

Every time I go back to my folks' place, I always have to stop and wait for the deer to cross the driveway. And they'll sit right in the middle of it. After I got hit, they're more of a nuisance

lmfao I'm out for a bit.

a douchebag. Proof that money can't buy you either knowledge or people skills.

I <3 Nikon lenses. Their primes are still amazing Looks like you've got some softbox action going on there?

Just killing time until an APICS meeting tonight...then studying for a supply chain test tomorrow and finishing up a presentation. Easy, but time-consuming

http://washingtondc.craigslist.org/nva/mcy/878874518.html I saw the ad for that bike on the Richmond CL last month, for $3000... Even with a receipt for the service done, $4500 for a non-toaster one is being very optimistic.

Considering we don't know what you didn't like about the SX's, what do we have to go on exactly?

The whole gain-position-myth-thing needs to be put to bed

250-500W...

Not a bad amp if you're thinking about upgrading in the future, although I'd probably just get a plate amp for the SR if you don't have any immediate upgrade plans...

Didn't see that thread, but considering how much shit has been popping up here I can't say that I am surprised. It's people like that who are the Fitards of 120V

All the more reason to get down here and do the Parkway/Deal's Gap/whatever else we can find

Nah, different road...the one to WV actually went someplace