Everything posted by BigCProductions99
-
2 18"btl
Around 4 Cubes After Displacements Each Driver If You Want A Seperated Chamber Box.
-
My Dual IXL 12 Build
Ewwwwww. Elemental D**kheads. :|
-
mac's BL15
95% Of The Time Two Woofers Either Seperated In One Big Box With Each In It's Optimal Sized Chamber Or In Two Optimal Seperate Boxes Are Louder Than A Box That Is Common Chambered.
-
NEW 15BL
Yes, You Probably Want To Get An Auxillary Battery. Preferably Higher Than 1000 CCA. I Would Do The Big 3 Also, If You Haven't Already, In 1/0.
-
Opinion wanted-- for an SQ setup.
Just To Specify Also, I Run 640 Watts RMS On My Front Stage With Only 4 Drivers, I Am NOT Considered An SQ Guy. Well, I Will Be Running That Much When I Get My Morel CAT378's, These Damn Selenium ST350's Can't Handle It, And They Sound Like
-
Final Design. No More Changes.
...Sounds Like He'd Be Better Off With A Truck. Lmao.
-
Opinion wanted-- for an SQ setup.
www.madisound.com
-
Finally Got wheels again
You Know I Was Kidding, Right?
-
FI BTL 18" SHIPPED TO THE UK!
Scratch That Last Post, I Obviously Haven't Checked BladeICE In A While.
-
how do i support 3000 watts
BigCProductions99 replied to rodneydude23's topic in Amplifiers / Head Units / Processors / ElectricalTotally Off Topic, But That New Avatar Pic Of That Lincoln = Sex.
-
Project Slow the Flex - v1
Lvl 5's Are Louder On The Highs, But The DP's Hit The Lows With Supremacy. At Least That's What I've Seen. and the question was for iamamp3pimp < as this is his system I Never Said I Was Him, Did I? Just A Statement. That's Why I Added The Other Line. And Out Of Hearing Both Drivers, That's What I Conclude.
-
Time for upgrade!
The Warden Is On Par With The Digital Designs Z, It Would Annihilate Your Other Choices, The DP Is The Incriminator Variant Of That Class. And I Think That Neo Monster Jacob Is Working On Would Be Great For You.
-
WMD18" vs. eD 19ov.2
And Just To Specify, I Would Rather Have A Funky Pup Than A eD Product.
-
WMD18" vs. eD 19ov.2
You Should Get Two. I Can't Remember If They Only Come In Dual 1 Or Not.
-
While at the carwash...
Boo, I Say! You Should Have Shown Him The Way Of The True Basshead, Grasshopper. Annihilate The Idiots, Pillage Their Weak Mainstream Crap! Boo!
-
HELP
Wtf Is With Everyone Using Duran's Box? Lmao.
-
Project Slow the Flex - v1
Lvl 5's Are Louder On The Highs, But The DP's Hit The Lows With Supremacy. At Least That's What I've Seen.
-
Future buyer of Fi BL Looking for input.
No Better Amp For The Dollar, No Better Customer Service PERIOD. They Are Extremely Underrated.
-
2002 Ranger Build (opinions wanted)
...2000 Watts RMS x 1 @ 1 Ohm = 1000 Watts RMS Each Driver, And The BTL's Don't Even Wake Up Until 2.5k.
-
trying to fit.....
Not Very Nice To Call The Ball And Chain That, She Might Take It Out On Your Pecker.
-
Finally Got wheels again
Boo. Soccermom 4x4. Lol, I Wanna Say I'm Just Kidding, But I Can't. Put A Solid Axle Conversion On It And Some Damn 39.5" Super Swamper TSL Bias Plies Or Boggers.
-
overheating.
Jon, As Much As I Love Ya Man, Take A Good Hard Look At My Avatar.
-
Project Slow the Flex - v1
And If You Do It The Way I Mentioned, You Could Drop Objects Ten Feet Above The Roof And It Shouldn't Dent The Whole Damn Thing Nor Should It Move, At ALL. And When You Do The Square Over The Plating, Do It Like A Tic Tac Toe Board, Even Spaces Vertically And Horizontally.
-
Project Slow the Flex - v1
1/8th Inch (Thickness, Not Width. Width Should Be About 4 Inches Or So.) Strip Plate Vertically And Horizontally, Heated And Formed To The Curvature Of The Roof. Thicker Wall Thickness On The Square Tubing, But Not Bigger Diameter. (Same Size, Just Thicker Walled.) Then (Think About A Roll Cage Or Roll Bar On This.) Either Take 1 1/2" Overall Diameter Round DOM Tubing (Or Chromoly, Doesn't Matter.) Or The Same Square Material, After The Initial Bracing Is Done, Space Them Apart About A Foot From The Center Point Of The Roof At The Very Back Of It, And Take Them To The B Pillars Of The Doors, It Should Make A Triangle Like Opening In Between, Then Cover It With Some Sorth Of Thin Sheet Metal And Tack It (Weld) To It To Cover The Space. Then Cover It With A Closed Cell Foam Sheet Or Carpet, For The Initial Bracing On The Roof Itself, I Would Use Some Cut Up Sound Deadener In All The Spaces You Can, Then Cover It With Whatever You Like. I Would Also Do The Support Beam Theory (Like The Roof To B Pillar.) To The A Pillar (The Part Next To The Windshiel On Both Sides. NOT The Moving Door Parts.) Run A Tube Like I mentioned Before Or A Piece Of That Square. These Should Be Short And Welded High Up As To Not Block Any Entrance Path Or Viewing Path. I'll Show You Some Mock Up Pics When It's Daylight To Show You Better. I'd Also Find A 220V Mig That Uses A Shielding Gas, Not Flux Core.
-
Custom 12" Sub
And As A Side Note, Don't Educate Those Mainstream People. They Are Our Entertainment, Our Puppets To Laugh At. The Idiots Of The Industry. Without Them, We Wouldn't Laugh As We See The Face Of A Completely Demolished Kid Who Thinks He's Got A Big Pecker With His Kicker Or RF 12"s.