casedawg350

YEAH! i was so mad. and i tightened it as hard as i could.

the fuse is the power wire one. i didnt put it under the hood by the battery cause there was no safe place. ill get a pic tonight and post it on here.

my fuse is one where i have to strip wire, but a ring terminal on both ends, then put the terminal over the posts that i tighten the nut on that holds the fuse in place. i first used the terminals that came with the kit, i just smashed the wire into the terminal on the ground with a hammer (ik im a noob but it worked for the battery end). it slipped out when i was running my wire, so i started over with both ends, and used a vice this time to hold the wire into the terminal. they slipped out AGAIN, ( ) so then i said F it and just smashed the raw wire between the fuse and nut, lol. what should i do!? the fuse is just gonna be sitting under my back seat in my explorer if that makes any difference.

Yes alright thanks

alright thanks guys!

thanks a lot! do i have to check that for every message i wanna save?

i was told if i had the RCA wire form hu to amp next to my power wire it can cause interference? this was from a kid that is known at our school for knowing about car audio...

can you tell me where that option is?

i went to look in my sent pm's box and none of them are in there. anyone know why this might be?

what is the ib3 for?

WOW! as an ATV racer, just WOW!

i dont get it, what keeps the ply from moving with the box? The sheet would be as big as the cargo area and you would cut it to fit so it couldn't move. oh ok got it! ill have to see what i can do. thanks.

i dont get it, what keeps the ply from moving with the box?

yeah, id rather not drill through my hole cause my gas tank is under there. thanks for the input.

i drive an explorer, and im only gonna have 1 sub in a 2 cubic box. what are your guy's tips for keepin it in the middle right behind the back seat? thanks for any help you guys can give me. edit: DO NOT wanna drill into the floor.

You will have to show pics of that one when it all done alright, ill have pics on here saturday night.

awesome. thanks a lot guys!

NO!! haha. my username over there is the same as it is on here, im not on there much though.

central indiana

no.

buddy of mine.

is 110 dollars for a carpeted, with terminal, 2 cubic feet tuned at 33hz box?

thats pretty close to what im doin. Fi SSD 12 on a 1208d at 2 ohms. my first set-up as well. mids will probably come later in the year.

HOW is that amp too much? Bp adds at least 200, so his sub can handle at least 1000. the amp is rated at 1100, but DOES NOT do rated power. i dont get it...

what is the difference in ports?