vj226966

cool thanks so its gonna be real close,The size box was 8.4 with port and speaker displacement and bracing in my pickup,so it might be dead on.My boy will be delivering my car next week some time so ill know better then.Thanks for the time you spent helping me out.

I bought two sets of them Pioneer Premiere componets running of a Sherwood 100x4 and my highs could be heard bout 2 blocks away load and clear.The tweets get a little harsh at high volume but otherwise i think they sound good.They love classic rock.Eagles,Clapton.

check out the mesurements he gave me,thanks for trying to help me though.LOL

Well the guy im buying the car from did some mersuering and he came up with 11 cubes and some change not sure on his math but i could use some imput from you guys.If you all know how a RX7 is shaped ,from behind the seat in the hatch area,from the shelf to roof is 21".At the rear where the hood latch is is 10"I have either 36 or 40" in depth and 36"wide all the way back.He came up with approx 11 cubes not taking thickness of mdf and double baffle and bracing,if that helps out any.

I havent been on here in a while and im needing some help.I finally got all of the equipment for my system.It consist of 2 sets of Pioneer Premier 63/4 comps 1 set of Infinity 61/2 comps.An Orion 2100 HCCA pushing 2 custom built 15s and a Kicker 3 way crossover and a bunch of dist blocks,fuses,Rcas ect.All of this was going in an ext cab Chevy,but some lil 18 yearold rearended me and totaled out my truck.Damm im pissed talking about it.My question is can i squeeze 8.4 cubs out of a 1st gen RX7?Thats the car im buying cause dont have enough for another truck.Does anyone have one or know someone that has a setup like this?Any imput would help out alot.Thanks in advance.

yeh that sounds smart.That will free up more money for the other things i need.Only have 5000.00 to spend.Thanks for your guidence.

that sums it up.That would be a waste of money and watts.But it would look cool as heck though!LOL!

cool,cause 1200.00 per amp is alot.I see alot of people with 2 3500 sundowns on each sub.I may go with 2 2000.1 instead.thanks for the reply.How dose Mead run 1 4000.1 to each sub?

Just wondering,im planning my build and want to use 2 RFT4000.1s.Will that be to much or should i go with the RF2000.1?I want one amp per sub.

Does anyone have 2 of these beast in there truck so i can get some ideas?

thank you

Im trying to find the correct price of this sub.The MSRP that i see is 379.00.Im trying to find the price that i would pay.Can someone help me?

thanks for the reply.The last time i had a "system",i was like 20 years old and now im 36.I had 2 12 Cerwin Vegas with a Soundstream a600.That was the chit back in the day.There is alot of new stuff out there now and im trying to school myself thats all.I love this stuff"car audio",keeps me out of trouble"lol"

Lot of helpfull read there man.So i guess it would work.Thank you again.I still would to hear from other people as well.Thanks again and i didnt want to tick anyone off.

now im confused.Every speaker has a rms and a peak rating.To me that means if you speaker has a rms of lets say 200 watts and a peak ao 400 watts i would not want to run anything that puts more than 400 watts. Am i correct?How can Steave Mead run 20,000 some odd watts to 4 18s?Im not trying to sound stupid but i kinow you cant over power or under power.So would 2 18Btls that are 2 ohm wired to a Saz3000 produce a 1ohm load sending 3000 watts to both or would it be 1500?Do you see were im going?Would i get more spl from 2 15s and 3000 watts or 2 18s and 3000 watts.This is were im confused.Sorry for all the post im just trying to plan this out the right way.

ive been on this computer all dang day trying to find out stuff for my build.I know what i have asked and this is a legit question.All Fi subs have the same power rating"RMS".I cant find there peak.I am smart enough to know if you underpower a sub you can damege it.Let me try to but this another way.If i decide to purches 2 18" BTLs would a SAZ3000 be enough to run these sub to correct way or should i stick with the 15s?Like i posted before i have 1600.00 or so to spend on my build and i want to get every pennies worth.Im not trying to be a smartass,but thats what im tyring to find out.If you had a set amount of money to spend wouldnt you want to get your moneys worth?

Will a Saz3000 be enough sower for these subs or be underpowerd?I think i may have the room for them being i see people on youtube with them in hatchbacks.I have 96 Chevy 1500 ext cab with no back seat.Would it pound or should i stick with 2 15 Btls?

thats still good ill look into it thanks

Ive been searching the web so much my eyes are bleeding!"LOL".Yehh i seen if you pay 12.00 he will send you a plan for a box build.Ill probably go that route.Thanks for your advice.

Sorry forgot to say something.I was thinking of haveing to the subs pointing towards the front and box setting up higher.I want the ports lower"along or close to the bottom.Is this a bad idea?How should have subs pointing and ports pointing for max sound?

Thats what im after,but for 2 15s.Is he a member here.I wouldnt know how to make it for 2 15s and have the right specs.Thanks in advance.

No,im taking out the back seat all together.I will have plenty of room i think for two 15Fi BTL fully loaded.

I would like to know if anyone has built a box for these subs in a ext cab truck.I tried those programs and i have no clue on what im doing.Im looking for pics,vids or any kind of help.Im taking out the rear seat so i think i have plenty of room.Any ideas?

thank you that helps me out alot.i got one shot at this and i wanna do it right.you guys been great! :bigclap:

its odd to me that a 12" sub has the same power handling as a 15 or a 18" sub.Im trying to decide what route to go on my new build.I havent had a system in over 15 years and just got permission from my wife"lol".