wof131s

Thanks for the quick input guys. Ive decided to get a 15" DR and put it in a 3.5 cuft box tuned to 30~32 Hz.

Ill look into the DP line since I have heard so much about them, but even with that sub wouldnt the RD audio HW be a better choice? Am not stuck on the brand just wanting to get the best product for my money as everyone here would?

Am wanting a bit more output. Dont get me wrong, Scott makes amazing subs but for me am just wanting more output. I love the Q, it gets low as a mudda f@$%er, am just wanting a bit more output. Ive tried it in 3 different boxes tuned higher(32Hz, 35Hz) and lower but didnt get what i wanted. I was just wanting some feedback on both woofers. I know that tensions maybe high between the 2 companies but like i said i was just looking for some input from folks that may have had the experience of both woofers.

Am currently decideing between getting a 15" Incriminator Audio Death Row (with the correct gain setting and knob control) or a 15" RD Audio Heavyweight (SQ model). I have 2000 ~2200 watts of rms to play with and planning to use a 4 cu.ft enclosure tuned to about 28~32 Hz seeing that the enclosure size is within both woofer's specs. Electrical is not a problem ( 230 amp HO alt., Big 3 done with double runs of 0 gauge, kinetik 1800 in the back). Am wanting to know which sub to get. I know that this may not be the best forum for the topic but i like to hear both positives and negatives of the sub(s) that am thinking of purchasing. Am wanting a sub that is musical and can produce great low end response seeing that I listen to mostly reggae, rap and alittle R&B. The enclosure is going into a 2000 dodge dakota ext. cab, and money is not a problem. I like having nice SQ but like to have the ability to get loud when needed. My present setup is a 15" Fi Q on a AQ 2200D in a 4 cu.ft box @ 30Hz. Any input would be great. Thanks

Thanks

Did the math, not sure about port end correction.

Like the topic says. Does anyone know how accurate the numbers are? Port Length Calculator Thanks

Ha Ha, I get it. He said and spelt it wrong. Ha Ha. May have had one to many english classes. I shouldnt laugh though, I write text type messages in forums all the time. Its funny to me, my opinion. Good one dude.

Very Nice, Very Nice

aircraft repair company, but dont know how much longer. things are tough

I'd bet you'll never see 4v on your headunit and either way it doesn't change how you set anything. Well am just going with the mfg specs. Pioneer is known to make pretty good HU.

So what your saying is its ok to wire the sub to 1 ohm as long as i used the formula given in the link above and take it easy on the volume? Lets say with the BP power the sub could do up to 1500 watts rms. To be on the safe side i could set the gain to 37.4 volts with a DMM and run the sub at 1400 watts rms?

It is, it just hits close to home for me.

Ive been looking through the forum and online but couldnt find a decent review on the IA Death Row perferably a 15". My search here usually led to one member refering to the sub as a great option to uses. Can anyone direct me to a good review? Or can anyone using the subs say what they like and dislike (if its possible) about it. Thanks

lol. Dont play anymore. Played for Southeast Missouri State a few years back. I took out my back seat and panels and think ill go with a 6 cu.ft box (Gross Vol.) and an amp stand build into the box. So after all displacement, ill have a 4 cu.ft box tune to 30 Hz, for a 15 Fi Q. If i dont like the output, ill try the IA Death Row 15" and see what happens.

Just want to say much love to all the Haitian massives out there in this time of stress and struggle. Bless Up.

Never thought about it like that. Thanks a lot dude.

Am trying to calculate the exact cu.ft for a wedge enclosure. I tried a few different sites and got anywhere from 5.8 - 6.0 cu.ft. Since I needed the exact size I worked it out by hand myself. Here are my dimensions and what i got. Can anyone double check this for me please? Wedge Design Outside Dimensions Height = 22" Depth 1 = 10" Depth 2 = 20" Width = 39" Formulas used: Rectangle L X W X D Triangle 0.5 (B X H X W) Since the design is basicly a rectangle and a triangle combination, thats how i calculated it. I got 4.12 cu.ft for the rectangle and 2.06 cu.ft for the triangle with a gross volume of 6.18 cu.ft. I also took into account that the 1.5" (0.75" + 0.75") thickness of wood that "attach" the triangle to the retangle along the length was removed and added volume to the enclosure. Does this sound right? Thanks

, Thanks for the quick response.

Does the SPL FX1-4000D amp do rated power? Or does anyone have experience with it?

Thanks dude.

Ok, i know that this is a noob question but with a HU that puts out 4 volts, and running the amp (AQ 2200D) at 2 ohms, what would be my target voltage to get the full 1300 watts out of the amp. Am going to uses a DMM and a 50 Hz test tone to set the gain, cant get my hands on an oscilloscope , thanks.

will do. Thanks guys

Will a 15" Fi Q with BP power be ok on a AQ2200D amp at 2 ohms (1300 watts) or will that be to much power?

Ok I get it. Thanks