sandsnip3r

Im asking Any and Everyone here to tell me what they think that the Hifonics BXI 2608D (rated at 2600Watts RMS) really puts out..... thanks

its a 2000 hyundai sonata

x2 tirefryr nice but not....

1. would i need one? 2. neither of them have Hyundai's

Will i need an aftermarket alternator if im running a hifonics bxi2608d? at around 2200~2400 watts in a 2000 Hyundai sonata with 1/0 power wires and Big 3 upgraded.....

would 30ft of 1/0 be enough? for batt to amp, ground amp, and BIG 3

hmmmmmm we'll see ill be in for a suprise if i was running 2 15" type Rs Sealed at 440watts each and going to a FI BTL 15" optimumly Ported at ~2400Watts :-D hhahahahahah YAY DEATH

(100% copper, ~15-20ft, 1/0 AWG) so hows about a 300A to the alt and a 250 to my hifonics BXI2608D? with my previous amp do you think i was only running it at around 880 watts? i was running it at 1 ohm...

Battery to alternator is again depend on the wire size. 1/0 my bad and what do you mean hifonics recommendations for fusing? it only says "Fusing: 250A(Not included)" so whould i do the 250A fuse? closer to the battery or amp? for 1/0 AWG before i had the hifonics 2008 (2000W) and and it says "Fusing: 200A(Not included)" but the wiring kit that i had came with 4AWG and an 80A fuse.... right by the battery

and a 250A or 300A?? from batt to amp

so a 250 A fuse to the Amp and what about from the battery to the Alternator, for the Big 3....?

i got this one sub hooked up to my computer that does somewhere near 300 dB no lie its one of the 5.25" baddasses

oh here, for example on the hifonics 1200Watt it says Fusing:80Ax1 but on the 2600(what i have) it says Fusing: 250A(Not included)

where is the amp's fuse rating?

-80 dB Underwater nuclear submarine microphones listening to shrimp chewing on food at 100 meters distance. 0 dB Beginning of hearing, a mosquito 10 ft away, the ear drum moves less than 1/100 the length of an air molecule. 100 dB Normal average car or home stereo at max volume. 110 dB A car stereo with two 6x9s and 100 watts. 127 dB Human tinnitus (ringing ears) begins. 152 dB Human vibration is painfull and also felt in all joints. 153 dB Human throat is vibrating so hard it is almost impossible to swallow. 158 dB Human body vibration is violent, nausea becomes more intence. 160 dB Ear Drum Breaks Instantly. 174 dB Air begins to heat up due to compression, most shockwaves are very hot. 180 dB 1 Pound of T.N.T. At 15 Feet. 180 dB Death of Hearing Tissue. 198-202 dB Human death from sound shockwave alone. 215 dB Battleship New Jersey firing all 9 sixteen inch guns. 230.59 dB 1000 Tons of T.N.T. 248 dB Atomic Bomb Hiroshima and Nagasaki. 257 dB Nuclear bomb, 1 Megaton. 320 dB Volcano eruption, Tambora, Indonesia, 1815, ejected 36 cubic miles. Approximately equal to 14,000 megaton nuclear bombs or a 14 gigaton bomb.

ive been told 300A for a hifonics 2600Watt

sorry for the quadruple post.... lol FUSE HOLDER: http://www.tti-plus.com/Bluewave-Audio-Pla...ti-bw-anhs3.htm FUSE: http://www.tti-plus.com/Bluewave-Audio-300...-anl-bw300g.htm WIRE: http://cgi.ebay.com/MONSTER-CABLE-25-FEET-...A1%7C240%3A1318 WIRE RING TERMINALS: http://cgi.ebay.com/MONSTER-CABLE-25-FEET-...A1%7C240%3A1318 Will this work to replace the Power and Fuse to my AMP (Hifonics BXI 2608D). And also to do the BIG 3? Will this work? Thankyou for reading, please help a brotha out :-D

Ok, im thinking of runing a few self tapping screws to bolt my box down to my car, and could i use those torx bolts to bolt the sub into the box? how do you guys have your stuff mounted?

with wire can i replace my 4 gauge power to my amp also? and i cant seem to find an appropriate fuse holer and fuse its a hifonics 2600 so probably like 2400Watts do i need like a 200 or 300A fuse? please help

ok, ill probably want like 25 ft of the 1/0 AWG EDIT: better http://cgi.ebay.com/MONSTER-CABLE-25-FEET-...A1%7C240%3A1318 that was the best i could find... could anyone find like 25' cheaper please?

ok, so what wire should i get? and if i got some of that welding like copper wire could i use that to run the power to the amp?

2 15" MB Quarts Ported 1200Watts vs 1 15" FI BTL Ported 2600Watts in terms of SPL

send me a message when you're on, i dont know how to send new messages on MSN, i dont regularly use it..

those were made with sketchup.....

hahah AHHHH found it, ill try to hit ya up later mine is [email protected] ill try to get on in like 3 hrs i cant get my sub from FI untill like the 5th on January and i cant start building the box till after that......