mrray13

in theory, yes... in application...who knows?? vehicle, subs, placement will all have an impact on which is the louder box... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

u see the part where it reads "2 ohm stereo stable, 4ohm MONO" by running it 2 ohm mono, u could have hurt ur amp and hence teh recurring power issues.... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

he's not in my state jim..lol.. and u referred him to me..bigboygrubbs ring a bell? wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Kent don't roll wiff nuffin less den tootowsand fitty. naw man. u gotz me all wrong...i'm down wid anytang at least twotoweloughtfoo..i mean, da scoot and da manz truck are both oughtfoo's.....da wifey only rolls da new shizzle u know hard hard it is to think that stuff out to type??? anyway, nick, i was jsut mentioning the year...that's all..i swear..lol.. i've got to figure out how to get 2.5 net ported behind da seats... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

well, they look like rebadged dd's....supposed to be the same as the 9500 series... they want big boxes... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

nick... anyway..i'm discussing an enclosure to go into a standard cab ford truck, vintage 1999.... any of u seen/heard of audioque subs?? click here wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

looks really good there ryan! how bad does the trunk rattle? i put a ported ten in an alero with just 400wrms from a kicker 400.1 and it rattles like there is a pair of 15's in there....lol... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

my morning is good..lol..not great...too much damn rain..THANKS TO DENNIS!! (the hurricane, not the pennis here) oh well.... good morning wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

also, when u ripped out port, u not only changed tuning that way, but u increased internal volume..which changes tuning as well.... so shortening the port raise tuning...BUT..increasing volume lowers tuning..... hell, u might not of changed tuning too awful much.... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

no...in theory, same power, the 6ft^3 box will be louder due to the increased "effiency" offered by the larger volume..in other words, it'll let the suspension max out easier then the smaller box will. the small box will allow u to throw more power at the subs and overcome the large box "effiency". in that way, the small box will be louder and in theory have a "tighter" response for the transients, and be less apt to be "boomy"(because of the smaller volume) wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

yes, no, and yes... yes, if u series ur dvc 4 ohm sub, ur at 8 ohms... no, ur not at 4 ohm because ur not paralleling to another sub. regardless of mono or stereo, the impedence is determined by the sub, not the amp. by having one just one dvc 4 sub u can only wire in 2 ohm mono, 4 ohm stereo and 8 ohm mono. and 4 ohm stereo will give u the same power as 8 ohm mono. yes, that is how u bridge an amp...unless it's already a mono block. u need to get us the model number of ur amp as i still don't think it's a two channel amp. i have yet to see a two channel amp that is 2 ohm mono stable. at least rated. and ur car is going to love ya as ur only pulling about half the power (if it's two channel, quarter of the power if it's mono block) that the amp can make by running at 8 ohm. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

steve..funny ass clip!! that was awesome!! comeon jim....help the canuck out...hehe and dennis..yeah, they are rather large cabinets for a pair of 4" drivers each..lol... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

i don't think u will...just make sure of ur enclosure and u should be jsut fine.. especially for that price wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

ryan, nick or jim will fix steve up..lol.. speaking of jim, he's got a package on the way...about 51pds worth..lol wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

welcome!! and post wh0ring is allowed in IHoP only!! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

it is a good looking design...well laid out! good job ryan! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

good morning and lol.. azbass...7" mids...focal? eD? my only guesses... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

but for real...i'm sure they'll renew....maybe.. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

a pair of 15" rl-ps off 1400+ wrms in the right box...yeah...u'll get loud..lol.... i'd suggest a box in the 2.5-2.75ft^3 range tuned to 32-34 hz with 25-30in^2 of port per 15...adn u'll be low and loud.... and sound really good doing it too!!! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

u have a d4..u can only wire at 2 ohm mono, 4 ohm stereo or 8 ohm mono. the answer to ur question lies in ur amp....what is it? what are it's specs? does it have a regulated power supply? and yes, the same power at 4 ohm is easier on the electrical system then the same power at 2 ohm...but i don't know why..lol..ijust know it is from experience. it has something to due with the current and amperge draw at that particular resistance...assuming both class d or similiar technology wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee hmm since i only have one rl-p, then it wouldnt be smart to wire it at 4 ohms stereo. its a power acoustik 1600w amp not sure which series. the power an amp puts at 2 ohm mono would be tghe same power it puts out at 1 ohm stereo, if a two channel amp...so u would be losing power by going 4ohm stereo... also, what two channel amp is 2 ohm stable mono? are u sure it's not a mono block amp? (even if it has a left and right output terminal, it's internally bridged) in which case, even if wired up seperately, u'd still be at 2 ohm mono... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

howdy!! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

interested in selling the tens?? wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

yep and how they are "o-ringed" to the terminal... very nice install.... but what are the subs??? they aren't xlc's are they? wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

lol... just all in a day's work my bro!! btw, ur cabinets will be shipped tomorrow!! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

mark does post as well... mostly in the for sale and show off areas.. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee