mrray13

that would be the man... [email protected]... don't forget to tell him i sent ya!! lol wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

no clue...most shops charge around $55-60 per hour..some more. figure about 16 hours labor..about $50 for bearings..$50-75 for an oil pump....and if u need it, $250-400 for a crank. but shop around, maybe u can find a shop that will charge a flat rate. this will be the expensive part (the labor), the parts are relatively inexpensive. good luck!! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Don't Lick Envelopes I used to work for an envelope company. Our plant supervisor used to work in the Chicago plant and told us not to lick the envelopes because they would often find dead rats at the bottom of the glue barrel (after thousands of envelopes had been glued and shipped). EEWW! ------------------------------------------------------ I work in a factory and we have 2 employees who used to work in an envelope factory. They told me that when the machine jams up, they use whatever water is handy to thin out the glue. This includes water that they just mopped the floor with. Since then, I've avoided licking envelopes... ------------------------------------------------------ If you lick your envelopes... You won't anymore!!! A woman was working in a post office in California. One day she licked the envelopes and postage stamps instead of using a sponge. That very day the lady cut her tongue on the envelope. A week later, she noticed an abnormal swelling of her tongue. She went to the doctor, but they found nothing wrong. Her tongue was not sore or anything. A couple of days later, her tongue started to swell more, and it began to get so sore, that she could not eat. She went back to the hospital, and demanded something be done. The doctor took an x-ray of her tongue and noticed a lump. He prepared her for minor surgery. When the doctor cut her tongue open, a live cockroach crawled out!!!! There were roach eggs on the seal of the envelope. The egg was able to hatch inside of her tongue, because of her saliva. It was warm and moist... This is a true story reported on CNN. ----------------------------------------------------------- Andy Hume wrote: "Hey, I used to work in an envelope factory. You wouldn't believe the things that float around in those gum applicator trays. I haven't licked an envelope for years!" ----------------------------------------------------------- To All: I used to work for a print shop (32 years ago) and we were told NEVER to lick the envelopes. I never understood why until I had to go into storage and pull out 2500 envelops that were already printed for a customer who was doing a mailing and saw several squads of roaches roaming around inside a couple of boxes with eggs everywhere. They eat the glue on the envelopes. I think print shops have a harder time controlling roaches than a restaurant. I always buy the self-sealing type. Or if need be, I use a glue stick to seal one that has the type of glue that needs to be wet to stick. ----------------------------------------------------------- PLEASE PASS THIS ON,. After reading this you will never lick another envelope or stamp ever again. Have a nice day, & keep your tongues where they belong! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

ummm...u've got a rod knocking... basiclly what's happened is the lack of oil has caused the bearings either on the rod end or in the main bearings themselves to get scarred. sounds like a bad oil pump as well...or some passages clogged up... anyway, ur goingto have to rebuild the bottom end... best case scenerio..u buy new rod and main bearings, as well as an oil pump, u mic the crank and find no flat spots.....truck fixed... worst case, when u mic the crank, u find a flat spot (where a bearing would ride) and now u have to either get the crank turned or purchase a new crank as well as the bearings and oil pump... take it to a certified mechanic man...it needs a bottom end rebuild. while not sever, it is major and needs to be done right! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

T.O.P. beyotchesssssssssssssssssssssss wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

dd's.. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

If that's the case, I need you to take a 38" diamter oak stock and run it through the lathe for mu custom sonotube! do they even make a lathe to handle 38" diameter? wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

welp... i gotta install my new speakers and sound deadning... but it's like 33* right now..i guess it can wait..lol not cold, but i'm in no big hurry... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

no way i'm going to edit all those..lol.. T.O.P. 1244-1249.. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

BLAM!!!!!! :gheychase: :gheychase: :gheychase: :gheychase: wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

BLAM!!!!!! :gheychase: :gheychase: :gheychase: :gheychase: wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

BLAM!!!!!! :gheychase: :gheychase: :gheychase: :gheychase: wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

BLAM!!!!!! :gheychase: :gheychase: :gheychase: :gheychase: wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

BLAM!!!!!! :gheychase: :gheychase: :gheychase: :gheychase: wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

BLAM!!!!!! :gheychase: :gheychase: :gheychase: :gheychase: wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

BLAM!!!!!! :gheychase: :gheychase: :gheychase: :gheychase: wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

BLAM!!!!!! :gheychase: :gheychase: :gheychase: :gheychase: wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

BLAM!!!!!! :gheychase: :gheychase: :gheychase: :gheychase: wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

BLAM!!!!!! :gheychase: :gheychase: :gheychase: :gheychase: wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

BLAM!!!!!! :gheychase: :gheychase: :gheychase: :gheychase: wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

BLAM!!!!!! :gheychase: :gheychase: :gheychase: :gheychase: wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

BLAM!!!!!! :gheychase: :gheychase: :gheychase: :gheychase: wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

BLAM!!!!!! :gheychase: :gheychase: :gheychase: :gheychase: wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

BLAM!!!!!! :gheychase: :gheychase: :gheychase: :gheychase: wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

BLAM!!!!!! :gheychase: :gheychase: :gheychase: :gheychase: wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee