rmzsuzuki89

Got a layer of mat on. It went on smoother because I used a roller this time instead of a brush, worked quite well. I'm almost out of resin, so I'll be done until I can get out and get some more. Maybe I'll do a lil work on the baffles and port or something.

Getting started on the other side. Those white spots were messing with me. Their completely saturated, maybe just discolored or something lol. My half inch thick Tupperware lol. Gonna let that harden up a lil while I mow, then more layers of mat.

More coming in a couple seconds lol.

I use gloves, I'll try the powder. Thanks for the tip.

I'm thinking about doing two Powerbass 4xl 8" midbass (one in each door) on a SAX 125.2, and two sets of either the 2xl or 3xl components on a SAX 100.4.

I'm thinking about drilling a couple holes in the wood behind where the fiberglass is and filling the area with expanding foam. Just gotta make sure I don't put too much in and pop the fiberglass out lol.

Thanks

Haha I took a break to eat and get out of the fumes for a couple minutes lol.

Liked this pic for some reason, gonna look real good when I organize the wires. Put another layer of mat on, this is what it looks like now. I've glassed inside boxes on the wood, but never something like this with the cloth not against anything hard behind it. So I guess you could say that it's my first time glassing. Doesn't look too bad imo, just some places to smooth out.

Doing a lil glass work today. Burns like hell when it gets on the skin lol. Cloth up. First layer of resin on the cloth, tons of mat coming next lol. My lil fan doing work on those fumes lol.

Thanks Popcorn sounds good now for some reason lol. Haha nice, small world. I will have duals here in the future, but not immediately. Looking to run quad eventually.

A little update. Things have slowed way down, so I wanna pick it up again. Threw the two 10"s in a 4th that I built for my gf in for something temp. Started to try to round out all of the seem and corner areas. But when I figured out that it would a shitton of putty I was like F that lol. And what it looks like now with the temp setup in.

Got a lil more done today. Couldn't get a good pic of the whole thing lol. Gonna start on the port and baffles later this weekend or next week.

My gf wanted to do something, so I mixed her up some putty. That's all for now, gonna try to work a lil more on it tomorrow.

Haha ya.

Thanks A lil more will get done today, but nothing major until I can get out and a few more sheets of mdf.

Thanks, and me either.

Pretty close to the roof. Look at all that damn sawdust lol.

Fitting the top. Had to do it in two pieces because one wouldn't fit between the A-pillars to get it in haha. There will be layers of 2x4's in the middle where the port will be. Gonna start organizing there better pretty soon.

Got sick of climbing over the console.

Thanks

I'm walling my 4 at the B-pillars in my Expedition. You will have a ton more room than I will though...It all depends on what you wanna do. I'm tuning pretty low because I love lows too. They are great woofers.

I have an IA/SD build going on now... 4 DP21 Wall Build - SSA Car Audio Forum

Hopefully I'll have all of the top on Wednesday. Won't get much done tomorrow because I'll pressure washing.

Didn't get too much done today, too much running around. But a lil was done. Top in back. Starting on the front. Quartered